Ruffturbo911

Hi, I'm looking to install a torque arm relocation kit on a stock 01 WS6 A4 and I don't want to lose any ground clearance. Is such a thing available?

ragtopz28

iTrader: (57)

I bought my UMI short arm (brand new) from a guy that it was hitting on speed bumps/dips on his lowered car. They do set low, but mine is on a strip only car. I think there is a pic in by '98 build thread if you want to look.
GL

ragtopz28

iTrader: (57)

https://ls1tech.com/forums/attachmen...r-dsc04647.jpg

sillysspeed

iTrader: (21)

It's low but it will clear exhaust well. Ended up moving mine above the exhaust and no chance of hitting now

Ruffturbo911

I'm looking for a street setup and GC is a factor. Maybe BMR?

farmington

iTrader: (14)

I bought a used Spohn that was made for stock exhaust so it obviously didn't fit my aftermarket exhaust. I modified it to fit and kept it very close to exhaust. Have never hit it even since I lowered the car

ragtopz28

iTrader: (57)

I had a BMR (the long one) on my 02 Z that was lowered and it had good clearance. That's all you need for a street car. I just sold it...here is the one you want https://ls1tech.com/forums/florida-c...ount-sold.html