RPM Transmission So if all goes the way i thnk its gonna go ill be buying a level 5 RPM Trans 60e. Ive heard great things about them and they have been great to me. I know some of yall have their transmission any info you can give me? Like testimonies based off your ride? Any info of their 60e level 5 or any of their trans that yall delt with would be great. Im looking to make 550rwhp from a mustang dyno at most and they reccomended that trans. |
550rwhp will be obtained with a 100 shot on occasion, mainly if not only be using it at a drag strip |
I know a lot of people who have had rpm transmissions. I don’t know any who have been unhappy with them they all drove and shifted great imo. |
I had an RPM 4L60E in my old 94. Drove the living shit out of it not knowing the weaknesses of a 4L60E. A bit on the expensive side but it didn't give me problems in the 30k miles I had it. |
Nice should i get a new stall while im at it? My current stall i bought back in 09 from fti 3600 stall |
Originally Posted by "MAC"
(Post 19831804)
Nice should i get a new stall while im at it? My current stall i bought back in 09 from fti 3600 stall |
Originally Posted by "MAC"
(Post 19831804)
Nice should i get a new stall while im at it? My current stall i bought back in 09 from fti 3600 stall As Game Ova also implied, I would HIGHLY recommend getting the converter at least freshened before installing it in that nice new transmission. shoot me an email, PM, or give me a call at the shop and we can discuss options, pricing, and the restall procedures if you would like to go that route. -Dalton |
Originally Posted by FTICONVERTERS
(Post 19831916)
We can do a freshen up on your converter that will cost you MUCH less than purchasing a new one! converting to triple or restalling the converter while we have it open are also options. As Game Ova also implied, I would HIGHLY recommend getting the converter at least freshened before installing it in that nice new transmission. shoot me an email, PM, or give me a call at the shop and we can discuss options, pricing, and the restall procedures if you would like to go that route. -Dalton |
I found RPM's customer service after the sale to be absolutely horrendous - especially once the trans died (jury is still out on the root cause). When it came time to rebuild our 4L70E I saved a small fortune going with having a local shop build it to my specs. My point is the Level 5 RPM offers is just a few minor updates and a Trans Go shift kit for a very large sum. We binned most of the contents of our Level 5 as it is so antiquated. |
Performabuilt here! Top notch customer service! Thx Frank and Alan! |
Originally Posted by mOtOrHeAd MiKe
(Post 19832447)
I found RPM's customer service after the sale to be absolutely horrendous - especially once the trans died (jury is still out on the root cause). When it came time to rebuild our 4L70E I saved a small fortune going with having a local shop build it to my specs. My point is the Level 5 RPM offers is just a few minor updates and a Trans Go shift kit for a very large sum. We binned most of the contents of our Level 5 as it is so antiquated. |
Originally Posted by "MAC"
(Post 19832552)
Ive tried some local shops hence why im on my 5th trans now i coyld get a level 6 if i can swing it. |
Originally Posted by mOtOrHeAd MiKe
(Post 19833550)
There is nothing special about the leap from a 5 to a 6 as it relates to internal updates... just the billet shaft, IIRC. You are better off saving up once and getting real upgrades than spending 6 times on hype and empty promises. |
Hmm ... |
Im not going to get into a pissing match over this. But as long as your vehicle is tuned properly and you use a good quality torque converter (like the FTI you have) you wont have any problems like the gentleman commenting negatively. MAC if you would like to discuss options I'd be happy to talk with you. Give me a call any time at 1-800-406-1109 |
Originally Posted by Jeremy@RPMTransmissions
(Post 19834544)
Im not going to get into a pissing match over this. But as long as your vehicle is tuned properly and you use a good quality torque converter (like the FTI you have) you wont have any problems like the gentleman commenting negatively. MAC if you would like to discuss options I'd be happy to talk with you. Give me a call any time at 1-800-406-1109 |
Thumbs up for RPM. I have had 4 different 4l60e’s. Theirs shifted the quickest and most consistent. I make the 2-3 shift at 7500rpms so things have to be perfect. My car has been 9.80’s on the ls1 and RPM 4l60e. I am going turbo now so I ordered a RPM powerglide. ;) I hate trans problems and a 4l60 not built just right is a temperamental little bitch. I have found local shops cannot build them for a performance application like RPM can. |
Originally Posted by sillysspeed
(Post 19835088)
Thumbs up for RPM. I have had 4 different 4l60e’s. Theirs shifted the quickest and most consistent. I make the 2-3 shift at 7500rpms so things have to be perfect. My car has been 9.80’s on the ls1 and RPM 4l60e. I am going turbo now so I ordered a RPM powerglide. ;) I hate trans problems and a 4l60 not built just right is a temperamental little bitch. I have found local shops cannot build them for a performance application like RPM can. |
Originally Posted by "MAC"
(Post 19835402)
Did you do their cryogenic process? No I didn’t. |
Originally Posted by Jeremy@RPMTransmissions
(Post 19834544)
Im not going to get into a pissing match over this. But as long as your vehicle is tuned properly and you use a good quality torque converter (like the FTI you have) you wont have any problems like the gentleman commenting negatively. MAC if you would like to discuss options I'd be happy to talk with you. Give me a call any time at 1-800-406-1109 |
All times are GMT -5. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands