UnInstall TransGo 4L80E-3 Manual Kit
05-17-2018, 01:48 PM
#1
UnInstall TransGo 4L80E-3 Manual Kit Im rebuilding my 4L80E right. It took me awhile to figure it out the previous owner had installed a full manual shift kit. The servos are missing their guts and the accumulator is pretty much gutted. I don't want a full manual trans for what Im doing so...……...how do I put this trans back to ECU operated?
When looking through the ATSG manual, I can find most of the parts that appear to be missing from the valve body. But, since I don't have the directions for the 4L80E-3 kit I have no idea what I would have to undo. It looks like NO internal mods are done to the trans with this kit so my theory is I can just buy a COMPLETE valve body (drop in ready) and that would essentially undo the full manual kit. Can anyone confirm this?
When looking through the ATSG manual, I can find most of the parts that appear to be missing from the valve body. But, since I don't have the directions for the 4L80E-3 kit I have no idea what I would have to undo. It looks like NO internal mods are done to the trans with this kit so my theory is I can just buy a COMPLETE valve body (drop in ready) and that would essentially undo the full manual kit. Can anyone confirm this?
05-17-2018, 03:01 PM
#2
TECH Junkie
You can call the transgo tech line and they will more than likely email you the instructions. Just explain that you are refreshing a unit and need the instructions.
I also sent you a P.M.
I also sent you a P.M.
