Double Check: 2004 5.3 mated to a 2008 4l60e
06-14-2018, 10:26 PM
#1
Double Check: 2004 5.3 mated to a 2008 4l60e From what I've read on this site I should have no trouble with the below, but I want to double check before I buy parts.
I have a 2004 5.3 (avalanche) motor and a 4l60e trans and converter. The motor came with no flexplate. I should be fine to buy a standard flexplate from a parts house for a 2004 5.3 and it should bolt to the 2008 4l60e with no spacers or other parts needed, correct?
Thanks,
Brandon
I have a 2004 5.3 (avalanche) motor and a 4l60e trans and converter. The motor came with no flexplate. I should be fine to buy a standard flexplate from a parts house for a 2004 5.3 and it should bolt to the 2008 4l60e with no spacers or other parts needed, correct?
Thanks,
Brandon
06-15-2018, 07:39 AM
#2
From what I've read on this site I should have no trouble with the below, but I want to double check before I buy parts.
I have a 2004 5.3 (avalanche) motor and a 4l60e trans and converter. The motor came with no flexplate. I should be fine to buy a standard flexplate from a parts house for a 2004 5.3 and it should bolt to the 2008 4l60e with no spacers or other parts needed, correct?
Thanks,
Brandon
I have a 2004 5.3 (avalanche) motor and a 4l60e trans and converter. The motor came with no flexplate. I should be fine to buy a standard flexplate from a parts house for a 2004 5.3 and it should bolt to the 2008 4l60e with no spacers or other parts needed, correct?
Thanks,
Brandon
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet