turbo 400 th400 ls1 bellhousing conversion/adapter
07-26-2006, 10:44 AM
#1
Launching!
Thread Starter
Join Date: May 2005
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
turbo 400 th400 ls1 bellhousing conversion/adapter hello, i'm fitting a turbo 400 to my ls1 powered chevelle as a backup tranny, and was wondering where i might find an adapter plate so i can use all of the bolts in mounting flange as the motor lacks one of the top-side bolts and the tranny lacks the 12 o clock bolt??? or can i run the car missing a few?
it seems to me the case will crack when i put about 1000hp past the tires with bolts missing in the bellhousing!!!
it seems to me the case will crack when i put about 1000hp past the tires with bolts missing in the bellhousing!!!
07-27-2006, 11:14 AM
#3
Launching!
Thread Starter
Join Date: May 2005
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
maybe something that doesn't involve cutting the bellhousing off of my rather pricey mike's ultimate vasco 400. maybe something made out of 1/2" steel w/ countersunk fasteners?
OR can i just use what i have and hope it works?
OR can i just use what i have and hope it works?
