Aftermarket torque converters available for the 6L80E?
#1
TECH Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 10,341
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket torque converters available for the 6L80E?
Does Precision or Yank or anyone else have aftermarket converters yet for these transmissions?
Any before/after results or other information that you can share?
Any before/after results or other information that you can share?
#2
Yank is th eonly one that I know of that is currently making on. Due to the very limited cores available for these things, it is going to be expensive or a while for the mainstream converter manufacturer's to come up with something.
#4
Not sure how nice a piece you are looking for... but typically the stock 13" converter stall can be taken up ~ 2500 rpm~ depending on HP and vehicle weight. We have done that for several of our budget minded customers locally.
Just a thought.
g
Just a thought.
g
#5
FormerVendor
iTrader: (21)
First let myself introduce... myself. I am Chris Sehorn from Circle D Specialties in Houston, TX. Just as most sponsers, we have been in business for 30+ years, just new to LS1Tech. I have my converter already in a few LS1's and such on this board.
Back on to the topic, CHRISPY
I have a converter for the 6l80. I have tested 3 and so far, no problems. Chuck over at HPE has put them in. We have played with the stall, but I still think it needs more. Currently they are about 2500 rpm, but I can go higher if you wanted. I have attached some pics, not sure if I did it right though
Chris
PS - I have more pics if interested
Back on to the topic, CHRISPY
I have a converter for the 6l80. I have tested 3 and so far, no problems. Chuck over at HPE has put them in. We have played with the stall, but I still think it needs more. Currently they are about 2500 rpm, but I can go higher if you wanted. I have attached some pics, not sure if I did it right though
Chris
PS - I have more pics if interested