flexplate
 

Hey guys getting ready to drop my motor in but had to install flywheel i went to jegs and got bolts when installing flywheel bolts are lil bit to long and the paper from arp say dont use washers did jegs give me the wrong ones or could i use washers. Sorry forgot to ad its a flywheel and its an a4

Make sure you have flex plate bolts and not flywheel bolts.Fly wheel bolts are too long and have a long shoulder to reach through the thicker flywheel.I dont think jegs or any one else list flex plate bolts,I wound up getting mine from chevrolet.

flexplate
 

The flexplate bolts right to the crank no washers or spacers