Idle and rev with Kooks and cam ***VIDEO***
#1
TECH Fanatic
Thread Starter
Join Date: Jun 2008
Location: Dallas, TX
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
Idle and rev with Kooks and cam ***VIDEO***
I was at SNL getting a oil catch can installed when they noticed a vacuum hose was unplugged. They plugged it back in and my car
would not run. It turns out that for the last year my car had been tuned to run without the hose, so they started over on the tune. Idle is still at 850 but timing is different and lope sound much better.
http://www.youtube.com/watch?v=5LyHF-gOiM0
would not run. It turns out that for the last year my car had been tuned to run without the hose, so they started over on the tune. Idle is still at 850 but timing is different and lope sound much better.
http://www.youtube.com/watch?v=5LyHF-gOiM0
#5
TECH Fanatic
Thread Starter
Join Date: Jun 2008
Location: Dallas, TX
Posts: 1,174
Likes: 0
Received 0 Likes
on
0 Posts
No clue.
When he was installing the catch can he noticed it. He said it was tucked up under the intake manifold and really hard to see. The dealership and I both missed it.
Matt (my tuner) had to start from scratch on my tune. All the tables were set for the car to run well with that hose being unplugged.
When he was installing the catch can he noticed it. He said it was tucked up under the intake manifold and really hard to see. The dealership and I both missed it.
Matt (my tuner) had to start from scratch on my tune. All the tables were set for the car to run well with that hose being unplugged.