Forgestar F14 Wheels Entering Production (6x115 - FINALLY!)
#262
TECH Veteran
iTrader: (12)
Join Date: Dec 2004
Location: Friendswood, TX
Posts: 4,137
Likes: 0
Received 0 Likes
on
0 Posts
Made 429 IIRC on motor tune and after pulling timing for the nitrous tune, it makes 413 on motor now and 550/553 on the nitrous. I have dyno graphs at the house that I can post from when it was tuned and dyno'd on the dynojet. Its tuned rather conservatively on a wet 150 shot to keep it safe. About to add fuel pump, 60# injectors, rails, ported fast 92, ported and polished 90mm TB, 25% underdrive pulley and retune it on the 150 shot hoping for over 600+. I can go up on the shot but 150 is the most I feel comfortable spraying. Really no need to go higher. I'm still on stock heads.
Last edited by NeverSatisfied02; 07-16-2012 at 04:04 PM.
#264
TECH Veteran
iTrader: (12)
Join Date: Dec 2004
Location: Friendswood, TX
Posts: 4,137
Likes: 0
Received 0 Likes
on
0 Posts
That was just cam, CAI, ported ls6 TB, full exhaust and a tune. The VRX5 is a great cam and makes great power. Pulls from 2100-6800 and loves spray. I was going to run an MS3 but it's a 3k plus powerband cam and I wanted something that would hit lower in the band considering the weight of the car. With the 4.10, this cam is perfect. With stock gearing, VRX3 is a nice stick.
#275
Launching!
#276
My tires are sitting at Discount Tire right meow just waiting.
I think I'm going to drive the rims over in the Jeep, have them put the tires on (while watching them making sure they don't F them up) and then take em home and put em on the car myself. That eliminates the chances for any oopsies with the impact.
I think I'm going to drive the rims over in the Jeep, have them put the tires on (while watching them making sure they don't F them up) and then take em home and put em on the car myself. That eliminates the chances for any oopsies with the impact.
#278
TECH Apprentice
iTrader: (3)
Join Date: Dec 2011
Location: San Antonio
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
At first I thought thy sent the wrong color. Then I forgot that titanium has a black base coat. Looks like I'll have them on the car Saturday morning since I fell asleep at the tire. #badpun
One other thing that struck me: the deep concave in all of the photos we've seen (including mine below) cannot be captured properly. These things are DEEP. In fact, I'm gonna eat some cereal out of these after I post this.
One other thing that struck me: the deep concave in all of the photos we've seen (including mine below) cannot be captured properly. These things are DEEP. In fact, I'm gonna eat some cereal out of these after I post this.