Cadillac CTS-V 2004-2007 (Gen I) The Caddy with an Attitude...

Car Running Rough

Thread Tools
 
Search this Thread
 
Old 05-03-2012, 04:55 PM
  #1  
Launching!
Thread Starter
iTrader: (9)
 
ChitownLS1's Avatar
 
Join Date: Sep 2003
Location: Chicago
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts

Default Car Running Rough

I came out after work and started the car up and it is running really rough. The engine is shaking visibly. There is no check engine light.

Are these the main possibilities?

Bad Plug
Bad Plug wire
Bad coil
Old 05-03-2012, 04:58 PM
  #2  
12 Second Club
iTrader: (55)
 
Derek98z's Avatar
 
Join Date: Jul 2002
Location: Raymore, MO
Posts: 1,785
Likes: 0
Received 0 Likes on 0 Posts

Default

Checked the plug wires? Did the MAF come unplugged? Suck up any water through the intake?
Old 05-03-2012, 05:31 PM
  #3  
TECH Fanatic
iTrader: (2)
 
wcryan's Avatar
 
Join Date: Apr 2011
Location: Escondido CA
Posts: 1,684
Likes: 0
Received 1 Like on 1 Post

Default

could be a few things. Water in your gas?
Old 05-03-2012, 06:55 PM
  #4  
TECH Fanatic
iTrader: (1)
 
CTSV_510's Avatar
 
Join Date: Jan 2008
Location: West Chester, PA
Posts: 1,249
Likes: 0
Received 0 Likes on 0 Posts
Default

Didnt you just have headers installed? Check your plug wires and see if any are contacting the headers and that all the boots are on tight.
Old 05-03-2012, 07:31 PM
  #5  
10 Second Club
iTrader: (27)
 
RsSean's Avatar
 
Join Date: Feb 2008
Location: Pensacola, FL
Posts: 2,182
Likes: 0
Received 2 Likes on 2 Posts
Default

We had a CTS V not to long along ago at the shop misfire like crazy and no SES light and it was a loose ground on the back of the head.
Old 05-03-2012, 08:16 PM
  #6  
Launching!
Thread Starter
iTrader: (9)
 
ChitownLS1's Avatar
 
Join Date: Sep 2003
Location: Chicago
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by CTSV_510
Didnt you just have headers installed? Check your plug wires and see if any are contacting the headers and that all the boots are on tight.
Yup...2 of them are sitting on the headers...one of them the rubber is split. I just ordered some Magnecore wires; and have some protective heat sleeves coming.
Old 05-03-2012, 08:17 PM
  #7  
Launching!
Thread Starter
iTrader: (9)
 
ChitownLS1's Avatar
 
Join Date: Sep 2003
Location: Chicago
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by RsSean
We had a CTS V not to long along ago at the shop misfire like crazy and no SES light and it was a loose ground on the back of the head.
Where exactly should I look for the ground?
Old 05-04-2012, 05:51 AM
  #8  
CTS-V Shifter Sales
iTrader: (6)
 
07CTS-V's Avatar
 
Join Date: Aug 2008
Posts: 1,164
Likes: 0
Received 8 Likes on 7 Posts

Default

Originally Posted by ChitownLS1
Yup...2 of them are sitting on the headers...one of them the rubber is split. I just ordered some Magnecore wires; and have some protective heat sleeves coming.
SEND THE MAGNECORES BACK!!!! I bought them and they constantly fell off and they started burning when they were only close to the headers. The stock wires are more than adequate.




All times are GMT -5. The time now is 11:58 AM.