***FOR SALE THREAD for Carbureted applications *** NOTE: New Rules!
#42
Staging Lane
#43
cam
Price is shipped, this camshaft was spec'd by none other than theeee Martin Smallwood. Dubbed "The Malicious Mullet", the idle quality was requested to be "the baddest bitch in the trailer park". It helped hurl 3030lbs of carbed 6.0/t56 down the quarter mile at 137 mph in just under 10 seconds. 242/252 .615"/.615" 108+5. SOLD!
I have an LQ4 with aftermarket LS3 heads. Double springs, stock LS3 Rockers. The description of the cam you sold sounds like what I want.
#44
On The Tree
iTrader: (7)
Join Date: Sep 2011
Location: Sevierville, TN
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
OK, I'm not ready to pull the trigger on an EFI setup yet, but I want to put out a feeler for a complete carb swap setup to see if there's even any interest and what a proper asking price should be.
Items that would be included:
Edelbrock Vic Jr intake (cathedral port)
Holley 750 HP Street carb
MSD 6014 with all wiring
Lokar throttle cable bracket with return springs and bracket extension for Lokar auto trans kickdown or TV cable
AllStar Performance 14" air cleaner
Valley cover with 3/8" NPT bung installed just behind the rear intake runners
Again, this is only a feeler post to see if there's any interest.
Items that would be included:
Edelbrock Vic Jr intake (cathedral port)
Holley 750 HP Street carb
MSD 6014 with all wiring
Lokar throttle cable bracket with return springs and bracket extension for Lokar auto trans kickdown or TV cable
AllStar Performance 14" air cleaner
Valley cover with 3/8" NPT bung installed just behind the rear intake runners
Again, this is only a feeler post to see if there's any interest.
#46
#47
#49
Victor Jr and MSD IGNITION Setup $385
EDELBROCK VICTOR JR + MSD 6010(OR 6012). Intake is new but sat on a scrap motor for years in a carport. MSD 6010 had 15 1/4MILE runs and a little street time. MSD 6012 was used to start a motor, then put away in storage immediately after startup. I'm asking $385 shipped for intake and one MSD box. If you want both boxes with the intake, I'll take $485. My number is 830 261 8963. I struggle with speech, so I'd prefer you text me. I accept paypal.
Last edited by SickSilverado; 11-17-2019 at 10:40 AM.
#51
https://ls1tech.com/forums/market/1953919
Have many Carb Parts for sale in market place - make offer.
- Holley double Pumper 810 CFM from The carb shop. Has all the bells and whistles. - Car trapped best of 130mph. Comes with a box of jets and squirters ect.
- EPS Cam for Carb application - EPS 234/246 601/615 @.05
- Victor Jr ls3 with bungs ported out
- Aeromotive Fuel pump and Regulator for carb set up.
- MSD 6010
I believe that is all the Carb specific parts. Please make offers.
best,
Have many Carb Parts for sale in market place - make offer.
- Holley double Pumper 810 CFM from The carb shop. Has all the bells and whistles. - Car trapped best of 130mph. Comes with a box of jets and squirters ect.
- EPS Cam for Carb application - EPS 234/246 601/615 @.05
- Victor Jr ls3 with bungs ported out
- Aeromotive Fuel pump and Regulator for carb set up.
- MSD 6010
I believe that is all the Carb specific parts. Please make offers.
best,