Start of LS s-10 Blazer
#42
Thanks, its been kinda slow lately, but at least im getting some done. Gonna work on the wiring then put he fenders back on. May run an intank fuel pump for it, not sure what came on 85's, it has an inline one right now
Did you see this? I just used thicker material for the braces
http://www.maliburacing.com/forum/vi...p?f=34&t=79059
Did you see this? I just used thicker material for the braces
http://www.maliburacing.com/forum/vi...p?f=34&t=79059
#46
I think you could. The blazer motors are 1.75 inches higher than an s10. I bet it would fit
This is about a 1/2 inch more drop than what I got. So i may try it
http://www.summitracing.com/parts/aa...6092/overview/
Biggest drop I know off is the l88 bottom for vettes, its 2 inches, but expensive
This is about a 1/2 inch more drop than what I got. So i may try it
http://www.summitracing.com/parts/aa...6092/overview/
Biggest drop I know off is the l88 bottom for vettes, its 2 inches, but expensive
#53
This thing is done thanks to family and friends. It runs pretty damn good. Lost 3rd and 4th in the trans a few days ago. Typical 700r4 stuff. Had it adjusted right and had the geometry linkage. I ran it on the old motor for years with no issues. Ill get a th400 or 4l80 and be done with it. Ill take some pics one day soon. Im still down in my back so it may be a while on the trans. It sounds awesome though. Just running an open x for now