Looking for opinions of carbed 5.3 s10 build
 

I am putting together a 93 s10 already set up for sbc but im doing a 5.3 has 411 rear gear and using a 700r4 trans with 3000 stall looking for opinions on the set-up engine will be stock running msd 6010 box and 700 to 750 dp carb either using the rpm dual plane or single plane. This will be moslty a street truck so im looking for advice on the intake and cam selction being a moslty street truck I still want to make good power it definetly wont be my DD

Any advice appreciated thx

Eric

With that gear and converter, I would pick the vic jr., 750 dp holley and a camshaft in the 220 to 230 duration @ .050 and a lobe separation angle of 108 to 112.

I'd do a 650 DP, edelbrock 2215 cam and performer intake.

You got a thing for that Eddy cam. When are you going to get yours?

Just know they work for many applications off the shelf. January I'll be running the 2215 in the 4.8.

5.3 in my S10 is stock except for carb conversion (Edelbrock first attempt) 390cfm 4bbl and stock cam reground to comp mutha thumper with a tighter LSA. th350 3000 stall and 3.73:1 gear. Ran 12.54@108 still had more once I do some small upgrades over the winter
Beaudacious

What year s10 88 I assume good time though for basicly stock 5.3 in hoping for 11s figure about 2600 race Wright in my 93

No sorry made my name when I had a 88 they don't allow you to change your name without losing your post history
The truck I have now is a 96.
Beaudacious

i have a foxbody with 327 gears and a 2800 stall and the victor jr with a 750 works fine for me i have the vrx5 cam

3.27 and a 2800? Would run like a while different car with 3.73 and a 4000, thats for sure.

ya i know i really want to but i dont have overdrive either so if i have to drive it anywhere then i know that would get kinda old i dont think it would cruise very well

Ths for the advice guys i think im gonna go with a 750 dp, vic jr, keep the stall around 3k and see if i can get ahold of EPS to spec a cam for my set-up and what im gonna use it for.

let me know how it works out