Carbed lq9 cam only I can get a used mti x1 cam for 175 bucks. Would it be a good cam for a carbed lq9? I am looking for a good cam for everyday use that can still put down good numbers on the dyno. I made 345 at 5900 to the wheels with the stock cam and converter. I am shooting for 400whp with a good cam and stall. More in on the engine and Trans. Dual plane intake with a 750hp 700r4 and 373 gears. Stall I was thinking of a 2800 to 3000 depending on what cam I get. |
I'm running a Howard Asa cam on my stock rebuild lq9 with 243's. Based my cam choice on a carcraft article where they did a stock lq4 with hotcam and loved the results. Figured the Asa cam would be even better with the higher compression 243's/ls9. |
Originally Posted by niscur29
(Post 17545975)
I'm running a Howard Asa cam on my stock rebuild lq9 with 243's. Based my cam choice on a carcraft article where they did a stock lq4 with hotcam and loved the results. Figured the Asa cam would be even better with the higher compression 243's/ls9. |
All times are GMT -5. The time now is 06:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands