Jesus Martinez

Can somebody post pics of there aje motor mounts on there ls block swapped fox? I can't seem to line my holes up

The stunningman

iTrader: (47)

https://ls1tech.com/forums/attachmen...tor-mount3.jpg

Jesus Martinez

Thanks man I have the mounts back wards lol also do u think foxbody headers with ls flanges would fit?

The stunningman

iTrader: (47)

Yep done it quite a few times even with the stock K member. I found 1 3/4" BBK 351W fox headers. Cut the flanges off flush. Rounded the square port. Used a trans tailshaft with the right size small bolt and welded a large 1/2" socket on the other end to put a breaker bar on and rounded them. Its a lot easier to take them to a muffler shop and have them swelled back to round if your bucks up or know someone.
Put them on the car and make sure they clear the transmission shift linkage before tacking them.

Unless you get a great deal on the swap headers, I would just get the dynatechs. Keep a eye on the classifieds here, they pop up for sale all the time.

Jesus Martinez

I found some 351w foxbody shorty headers for 100$ would these work

onequiklx

i went with the Kooks 1 7/8 swap and cant be happier. I have seen some 351 headers that are a mother to change plugs on .

The stunningman

iTrader: (47)

Never used shorty's on a fox swap. 1998-99 camaro manifolds would probably clear and you wouldn't have to change the flanges.

krochus

iTrader: (1)

The best money you can spend is the $300 or so it takes to buy a set of the LS/fox heddman hustler mid length swap headers

Jesus Martinez

While those clear the aje k member?