Carbureted LSX Forum Carburetors | Carbed Intakes | Carb Tuning Tips for LSX Enthusiasts

Windmill's 5.98 pass...video inside

Thread Tools
 
Search this Thread
 
Old Nov 4, 2013 | 04:42 PM
  #1  
streetknight2's Avatar
Thread Starter
9 Second Club
iTrader: (10)
 
Joined: Jul 2009
Posts: 1,087
Likes: 1
Default Windmill's 5.98 pass...video inside

Here you go Monk...Apparently I was a little shaky lol, but here it is.

http://www.youtube.com/watch?v=Jtboo...ature=youtu.be
Reply
Old Nov 4, 2013 | 06:34 PM
  #2  
windmill's Avatar
TECH Regular
iTrader: (4)
 
Joined: Sep 2009
Posts: 412
Likes: 1
Default

thanks benji,,, mine looked slow compared to yours,,, with the wheels in the air...
Reply
Old Nov 5, 2013 | 03:45 AM
  #3  
ZONES89RS's Avatar
In-Zane Moderator
15 Year Member
iTrader: (25)
 
Joined: Jan 2007
Posts: 11,941
Likes: 33
From: Conroe, Texas
Default

Nice, if only I can catch up!
Reply
Old Nov 5, 2013 | 01:48 PM
  #4  
windmill's Avatar
TECH Regular
iTrader: (4)
 
Joined: Sep 2009
Posts: 412
Likes: 1
Default

its tough when you get down low in the 6's to try and get that 5 sec pass.. now gota see what my next goal is,,, maybe to run 5's on motor..
Reply
Old Nov 5, 2013 | 02:51 PM
  #5  
ZONES89RS's Avatar
In-Zane Moderator
15 Year Member
iTrader: (25)
 
Joined: Jan 2007
Posts: 11,941
Likes: 33
From: Conroe, Texas
Default

Not too hard when everything is right. My lower compression and 3.73s as well as the tight Revmax converter are holding back a ton. The Trans brake in my future with 4.10s and a converter made for this car with some porter 799s should get me where I want NA. Then I'll throw the dope at it again.
Reply
Old Nov 9, 2013 | 08:08 PM
  #6  
windmill's Avatar
TECH Regular
iTrader: (4)
 
Joined: Sep 2009
Posts: 412
Likes: 1
Default

Well its sunday one more time,,, going to try some timing on motor,, we drop from running 35 to 30 and made really no diff in et's one 1 in 60ft and 2 at finish line,, but was better weather... so we going to drop some more on timing and test some more on motor passes,,,i know when it was all stock it like the 40 deg timing,,, but now with tick's cam I don't like as much... so will post results tomorrow,,, im going to try some 100 shot pills and see if I can get into 5's with 100 shot..
Reply
Old Nov 10, 2013 | 08:01 PM
  #7  
windmill's Avatar
TECH Regular
iTrader: (4)
 
Joined: Sep 2009
Posts: 412
Likes: 1
Default

well didn't much faster,, but done a little bit tune on timing 1.32 at 5.97 at 115 making some progress,,, but same on motor...
Reply




All times are GMT -5. The time now is 07:09 AM.