Neanderthal Carb Guy BS Thread This thread is for us carb guys who want to BS but do not have anything that warrants its own thread. Now Zones and TXSilverado have someplace to bust one another's chops without blowing up a tech thread. :jest: I'll start: I heard a rumor that Speedtigger may be testing a new cam soon....... |
LMAO great idea. I heard a rumor that zane wears granny panties. what size cam do you plan on testing? |
And that's more of a build thread than a tech thread:cheers: |
Originally Posted by TXsilverado
(Post 18434476)
LMAO great idea. I heard a rumor that zane wears granny panties. what size cam do you plan on testing? |
but zane's has racing stripes |
This would promote post count whoring, which can help scammers to post in FS threads quicker. |
Originally Posted by TXsilverado
(Post 18434523)
but zane's has racing stripes |
Originally Posted by TXsilverado
(Post 18434476)
what size cam do you plan on testing? There is also a possibility that I might test a few different cams. |
I like turtles |
Originally Posted by speedtigger
(Post 18434583)
It is not much bigger than the one that I have. It is entirely possible that the whole exercise won't change much, but I want to try few different strategies. There is also a possibility that I might test a few different cams. |
Speedtigger. What cam would you recommend for my setup. I have a 370 with tfs 220 as cast heads, Victor jr, qft 850, i.s sledgehammer plate. I only spray 250 to 300. I have a polluter cam in it right now but I am going to change the cam. It will be in a 72 skylark with a 400 tranny with a 4500 -5000 stall. 9 in rear with 4.11 gears. What would you suggest? Thanks in advance. Daniel |
Originally Posted by menchaca
(Post 18434914)
Speedtigger. What cam would you recommend for my setup. I have a 370 with tfs 220 as cast heads, Victor jr, qft 850, i.s sledgehammer plate. I only spray 250 to 300. I have a polluter cam in it right now but I am going to change the cam. It will be in a 72 skylark with a 400 tranny with a 4500 -5000 stall. 9 in rear with 4.11 gears. What would you suggest? Thanks in advance. Daniel |
Originally Posted by Prorac1
(Post 18434799)
I've always thought about going with a smaller cam and playing with cam timing. Try to get the same results I have now with a smaller cam |
Originally Posted by speedtigger
(Post 18435155)
Daniel, I would suggest you get with Brian Tooley. Those are some of his favorite heads and his unique knowledge of them will allow him to create a really well matched custom cam for you. |
Originally Posted by menchaca
(Post 18436096)
Thanks man. I am in the process of getting one from him. I am going to put this engine back in my mustang and try to run some low 5's. |
I'll join in. Thrashed the converter or trans from my s15 this year so everything needs to be taken out and gone thru. Couldn't get the truck to run hard like it did last year after switching pretty much everything this year so.... Thinking a single turbo mounted about bed level just behind the cab (for oil draining and keeping my swap lt headers) blow thru carb setup, a-w intercooler mounted in the bed just after the turbo, and a custom spec turbo cam. Something like a s400 ish and 10-15# fine tuned on the dyno dynamics eddy dyno the nearest shop uses. I could prolly sell my fast ez efi 2.0 kit to get some funds back. Thoughts? |
I would see if fast has provisions for doing a ez efi 2.0 blow through. Now that would be cool |
Originally Posted by 89gmcs15
(Post 18436428)
I'll join in. Thrashed the converter or trans from my s15 this year so everything needs to be taken out and gone thru. Couldn't get the truck to run hard like it did last year after switching pretty much everything this year so.... Thinking a single turbo mounted about bed level just behind the cab (for oil draining and keeping my swap lt headers) blow thru carb setup, a-w intercooler mounted in the bed just after the turbo, and a custom spec turbo cam. Something like a s400 ish and 10-15# fine tuned on the dyno dynamics eddy dyno the nearest shop uses. I could prolly sell my fast ez efi 2.0 kit to get some funds back. Thoughts? My brother sent me this picture of a pushrod out of the 406 in his 61 Vette. He pulled the valve covers and all of the rocker arms were super loose. He said you could grab them and flop them around by hand. Several of the pushrods had sheared off or lost the hardened tips. https://cimg5.ibsrv.net/gimg/ls1tech...3483d41142.jpg My Dad actually left that 61 Vette to me, but I told my younger brother he could have it. My Dad had that car my whole life and I saw everything he did to it. That is why I told my brother he could have it. It would have taken me the rest of my life to make that car right. LOL |
The ez efi doesn't work for blow thru setups for some reason. They don't want the liability or something I guess? I think with it more mid mounted and a smaller frame turbo it's lag shouldn't be tooooo bad. That's if I go thru with it I suppose it all depends on funds and what I'm doin thru the winter. |
Originally Posted by TXsilverado
(Post 18434523)
I heard a rumor that zane wears granny panties ..... zane's has racing stripes :jest: |
All times are GMT -5. The time now is 09:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands