Have to quit racing............ Due to health reasons and lack of funds I have to sell all stuff. The pickup will go as a roller with lots of good parts . If interested call and I can tell you what is on it. I've got plenty of LS parts some new, some almost new. LSX block new in crate w/ cam brgs F1X Pro Charger used , but was sent in for inspection and update. not used since. Bullet cam 248/260 dur and 625/621 lift. (2 runs) New in box SLP oil pump and double roller chain/gears used oil pump w/single chain and gears Yella Terra adj. roller rockers (2 runs) Super Vic cathedral port. 850 Pro Systems carb. all new parts. Headers w/gaskets electric water pump Theres more , if anyone is interested in any of these give me a call or text @ 417-5407254 Tks Steve . can send pics upon request |
:( good luck to you bro. Sorry about your health conditions. We just never know when life can take a turn. |
Hope you can get back to 100% man. Bad things can happen to the best. |
Very sorry to see this Steve. I have been through my share of medical issues. Fortunately I came through the other side in decent shape. I hope the same or better for you. |
Sorry to hear that Steve, I hope things get better for you. I've followed your build for a while now and I always thought it was an awesome truck. Good luck to ya buddy. |
Sorry to hear! Some nice parts for sale. |
Thanks to all who inquired about all my parts . Sold most all of it. The pickup rolled out of here yesterday, kinda rough to see it go. To see a full size pickup go from a 4.3 V6 with a 100 shot @ 4399# go 14.50's @ 97 mph to a Stroked 6.0 with a 250 shot @ 3365# go 10.28 @ 133 mph. cost a lot of damn money, lol. But I loved every minute of all that it took to get to all stages it went through. I do have 3 parts left...... F1X Pro Charger ... Power Glide ... Bullet Cam. F1X asking $2850 Glide asking $800 Cam asking $300 The trans was just gone through and new red clutches and a turbo input shaft put in. It has a hughs trans brake, manual valve body, deep pan and a scatter shield. Had 3 runs on it since. The cam was spec'd by Mark at Bullet specifically for my pickup with NOS. dur @ .050 248/260 , lift 625/621 , LSA 112.5. The F1X had just been sent in inspected and updated. Not used since. This is the charger only. I called Pro Charger to see how much a new one would cost and was told $4500. If anyone would be interested in any or all of the last I've got , give me a call or text 417 5407254, Can send pics from phone.Thanks a bunch guys .....Steve |
Sorry to hear that Steve |
All times are GMT -5. The time now is 11:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands