LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Carbureted LSX Forum (https://ls1tech.com/forums/carbureted-lsx-forum-172/)
-   -   Dart LS3 pro1 heads (https://ls1tech.com/forums/carbureted-lsx-forum/1911412-dart-ls3-pro1-heads.html)

sccagt1racer 03-27-2019 05:27 AM


Originally Posted by bad67ls (Post 20070398)
What compression and what inake manifold is on that engine?

The intake is a super victor and the compression is from what ive read is 10.8 to 1.

bad67ls 03-27-2019 05:54 AM

So its basically a stock longblock ls2 with an under .600 lift cam and a super vic and makes 600 hp and 500 lb ft?

Is that what i'm reading?

dmracing 03-27-2019 11:34 PM


Originally Posted by bad67ls (Post 20070472)
So its basically a stock longblock ls2 with an under .600 lift cam and a super vic and makes 600 hp and 500 lb ft?

Is that what i'm reading?

makes over 600 hp

TTur1996 03-28-2019 03:53 AM

Hard to believe that motor makes that power with those specs. Nascar boys did wonders on those heads to say the least.

bad67ls 03-28-2019 05:26 AM


Originally Posted by TTur1996 (Post 20071121)
Hard to believe that motor makes that power with those specs. Nascar boys did wonders on those heads to say the least.

Exactly my thoughts.

sccagt1racer 03-28-2019 05:43 AM

Wegner says that they make 620-625 hp and 510 tq on the ls2. They make 680 with the ls3 head on a 6.2 @ 11 to 1. These engines are nothing exotic just the right combination.

dmracing 03-28-2019 06:32 AM

https://cimg7.ibsrv.net/gimg/ls1tech...4bc75c35a.jpeg
https://cimg8.ibsrv.net/gimg/ls1tech...98ece76dc.jpeg
https://cimg9.ibsrv.net/gimg/ls1tech...b94ff78da.jpeg
https://cimg0.ibsrv.net/gimg/ls1tech...0a55758bf.jpeg
https://cimg1.ibsrv.net/gimg/ls1tech...a63539a29.jpeg


All times are GMT -5. The time now is 03:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands