Chevrolet Camaro 1967-2002 The forum for diehard Camaro fans

trouble after reflash? help!

Thread Tools
 
Search this Thread
 
Old 07-29-2014, 11:13 AM
  #1  
Teching In
Thread Starter
 
TheRealApoc's Avatar
 
Join Date: Feb 2014
Location: junction city, kansas
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default trouble after reflash? help!

ok, so I picked my pcm up from tuner yesterday. I had it flash tuned so that the car (99 Camaro ss) would run a little better so I could bring it to the shop to be full street/dyno tuned. Car would start up when it was parked and pulled the pcm out to be flashed. Only mods are longtubes and torquer v2 cam with 111 lsa. Now car will not start, no gauge lights come on, not even where the mileage is displayed, except for the seatbelt light which will flash and a chime comes from bcm area as I turn on the lights with the key forward. it does it 1, then 2, then 3, then 4, then back over at one. anything I can do or is it a tuner problem?



Quick Reply: trouble after reflash? help!



All times are GMT -5. The time now is 03:59 PM.