02 camaro with dynomax VT?
03-09-2016, 08:56 AM
#1
On The Tree
Thread Starter
Join Date: Jan 2014
Location: Richmond, Mi
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
02 camaro with dynomax VT? Haydumguys have long story but to make it short is I have a one year old lil girl at home that wakes up at the sound of foot steps and I go to work at 4 in the morning an trying to sneak out in my car wakes her up ever time and with having a cam ls1 with 3" y pipe to slp dump
. Yes it's loud! Was thinking about to change up my piping with a 3" inch y then over the axel and have it go into a dynomax VT muffler in the same spot at the stock muffer then hid a 3" or 4" inch tail pipe on the driver side just like a muffex system. Wonder if it would quiet it down a bit? then have a cutout somewhere. Any input would b cool with this muffler or maybe u guys have a similar set up. But somthing like this..
. Yes it's loud! Was thinking about to change up my piping with a 3" inch y then over the axel and have it go into a dynomax VT muffler in the same spot at the stock muffer then hid a 3" or 4" inch tail pipe on the driver side just like a muffex system. Wonder if it would quiet it down a bit? then have a cutout somewhere. Any input would b cool with this muffler or maybe u guys have a similar set up. But somthing like this..
03-10-2016, 07:43 PM
#2
On The Tree
Join Date: Jan 2016
Location: Dallas, TX
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully you aren't taking the car to work with those Hoosier slicks on it at 4 in the morning haha.
Why not get a real quite muffler setup then e-cutouts for when you want that loudness?
Why not get a real quite muffler setup then e-cutouts for when you want that loudness?
03-11-2016, 06:34 PM
#3
On The Tree
Thread Starter
Join Date: Jan 2014
Location: Richmond, Mi
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Lol hay the streets are no joke up here in D-town lol but no mine is just a mild built street cruiser car lol and that's what I want to do an was just wondering if that muffler is on the quit side. I no asking for quite cammed LS1 with long tubes is asking a bit much but I found the system that borla makes that I want to copy.. I would make it just like the pic but have the tips hidden and have a E-cutout on the one pipe like they have it.
Last edited by Riddle0288; 03-12-2016 at 05:34 AM.