99 1SC stripper build (pic heavy)
#27
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: LA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
yea i have a jeep in my shop at the moment with a blow apart rear end i don't feel like messing with but it's coming soon
i've already finished the tint and clear corners with led lighting but i'll make a post in here soon
i've already finished the tint and clear corners with led lighting but i'll make a post in here soon
#33
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: LA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
you can get lucky and find one once in awhile.....i pulled this out of my old car and put the stock one in it
i have one i can get rid of but it's coming apart from the clear plastic and someone has tried to glue it back i gave 40$ for it and was pissed when i received it
i have one i can get rid of but it's coming apart from the clear plastic and someone has tried to glue it back i gave 40$ for it and was pissed when i received it
#34
TECH Veteran
iTrader: (9)
you can get lucky and find one once in awhile.....i pulled this out of my old car and put the stock one in it
i have one i can get rid of but it's coming apart from the clear plastic and someone has tried to glue it back i gave 40$ for it and was pissed when i received it
i have one i can get rid of but it's coming apart from the clear plastic and someone has tried to glue it back i gave 40$ for it and was pissed when i received it
#35
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: LA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
4 seven MM screws the gauge cluster in
also pull the lower panel (one over your shins) which is I think 4 seven MM screws it will make removal of the bezel easier
after that just unsnap the clear plexi piece off the cluster and install the new one then reverse all the steps
#36
TECH Veteran
iTrader: (9)
2 seven MM screws on the bezel
4 seven MM screws the gauge cluster in
also pull the lower panel (one over your shins) which is I think 4 seven MM screws it will make removal of the bezel easier
after that just unsnap the clear plexi piece off the cluster and install the new one then reverse all the steps
4 seven MM screws the gauge cluster in
also pull the lower panel (one over your shins) which is I think 4 seven MM screws it will make removal of the bezel easier
after that just unsnap the clear plexi piece off the cluster and install the new one then reverse all the steps
#39
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: LA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
SO here's where she sits now
rebuilt the t56 to a stage two from texas drivetrain performance with an ls7 clutch also bought some amazon special longtubes that actually fit very well but then the speed engineering y-pipe not so much and i kept the stock SLP dual dual and it sounds great
and since my last post i pulled out the old worn bmr springs and slapped on a brand new set along with some LCA's , relocation brackets and a panhard (cut the ebrake mount after the pic)
and for the back country roads i live around i put 6k hid's in the low and high beam along with the dual light highbeams along with LED interior
well this is where it's at for a little while still working out 20 year old car issues but it's getting there also some bonus pic's with dad's car
rebuilt the t56 to a stage two from texas drivetrain performance with an ls7 clutch also bought some amazon special longtubes that actually fit very well but then the speed engineering y-pipe not so much and i kept the stock SLP dual dual and it sounds great
and since my last post i pulled out the old worn bmr springs and slapped on a brand new set along with some LCA's , relocation brackets and a panhard (cut the ebrake mount after the pic)
and for the back country roads i live around i put 6k hid's in the low and high beam along with the dual light highbeams along with LED interior
well this is where it's at for a little while still working out 20 year old car issues but it's getting there also some bonus pic's with dad's car
Last edited by sprung_monkey; 02-02-2018 at 02:21 PM.