Som Camaro SS build
#1
Som Camaro SS build
Always wanted one and set a goal in mind to build a great all around street cruiser that could do everything well.
Drove to NC to pick the car up after months of searching for a Formula Hawk or Cme Som SS.
I knew from the beginning what I had planned. I've owned 4 th gens over the year's. Forged wheel's, maybe win a show, out run a 6th gen ZL1.
Drove to NC to pick the car up after months of searching for a Formula Hawk or Cme Som SS.
I knew from the beginning what I had planned. I've owned 4 th gens over the year's. Forged wheel's, maybe win a show, out run a 6th gen ZL1.
#2
The car had 19k in it when purchased. So the search for some forged wheel's came to an end after finding a set of Fikse Fm5s that needed restoring.
After around 100 hours we got them cleaned enough to put on the car.
So then it was time to lower the car.
So now I was looking to start detailing the engine bay while waiting for to install the Heads and Cam.
After around 100 hours we got them cleaned enough to put on the car.
So then it was time to lower the car.
So now I was looking to start detailing the engine bay while waiting for to install the Heads and Cam.
The following users liked this post:
vince72 (09-12-2023)
#3
So now we move on to adding power. After having a bunch of different combos in multiple Ls vehicles I choose to go with Tsp Prc Cnc 227s heads with Hollow valves, milled to 59 cc's, 230/240s Cam, 1 7/8's Headers, Ported Fast 92mm.
Found a mini
Custom tag
Head and Cam install
Made the Fbody meet in Orlando!
Found a mini
Custom tag
Head and Cam install
Made the Fbody meet in Orlando!
The following users liked this post:
vince72 (09-12-2023)
#7
I had a 408 that had been sitting for lots of year's and well the Head and Cam just wasn't enough. Some I started ordering some more part's.
PRC 247s Hollow intake valves
Installed the heads and Custom 240s/250's cam
408 installed
Now drive the car to Daytona and dyno tune it.
PRC 247s Hollow intake valves
Installed the heads and Custom 240s/250's cam
408 installed
Now drive the car to Daytona and dyno tune it.
Trending Topics
The following users liked this post:
vince72 (09-12-2023)
The following users liked this post:
raymond mckinney (12-17-2019)
#18
TECH Fanatic
Nice build and h.p numbers!
The following users liked this post:
raymond mckinney (12-17-2019)
The following users liked this post:
raymond mckinney (12-17-2019)