Thread updated 11-Feb-09 This thread is not dead, if you have a good build thread or tips please PM me details and I will add it to the post. |
swap info This thread saved this forum at least 10 repeat posts by me. Awesome thread |
|
Thread updated 11-28-09 with kevin 67/6.0 and deletion of a couple links. For reference the deleted threads where BRP and Edelbrock links, both heavy hitters in the A-body swap parts world now days, so if you need headers, mounts etc.. look on their respective site. |
Thread updated Jan 11 09 |
i'm doing a ls swap in a 1970 gto i switched the motor mounts to the chevy mounts on the frame and when i went to put the motor in the car i can get the driver side bolt threw the motor mount and the frame mount but the passanger side holes for the mount are off by like a inch can someone help |
Originally Posted by ryanvv355
(Post 11035288)
Thread updated 11-Feb-09 This thread is not dead, if you have a good build thread or tips please PM me details and I will add it to the post. |
Another thread that may be useful, my 64 chevelle 5.3L/4l60E swap. https://ls1tech.com/forums/conversio...ld-thread.html |
Originally Posted by grantgto
(Post 12980094)
i'm doing a ls swap in a 1970 gto i switched the motor mounts to the chevy mounts on the frame and when i went to put the motor in the car i can get the driver side bolt threw the motor mount and the frame mount but the passanger side holes for the mount are off by like a inch can someone help Can you post the Chevy small block engine mount perch dimensions? I would like to see how they compare to my 300" Buick perches. |
will some one give some input on parts for a 1965 impala swap ls2/4l80e. oil pan, motor mounts,headers just want to get this sat down in there looked at the sticky but nothing matched thanx. |
its this hard to get help on this site. |
Does anyone have a list of transmissions that can be used that won't require cutting the tunnel? I know it depends on how far forward you want to mount the engine, but assuming you put the LS/LQX in stock position, what trans can you put behind it and leave the tunnel alone? I know the T56 and any of the new gm 6speed autos (6L80,90) will require a good amount, but what else? |
Depending on the year of car you have I would say that the only items that will fit without modification will be the TH350, 200-4R, 700-R4, 4l60 and any 4 speed. Even the TKO series transmissions require some minor cutting. Obviously you will need adapters for almost all of these trannys. |
Originally Posted by shortyb72
(Post 13696934)
its this hard to get help on this site. It is when you ask questions that are answered at the top of the thread you are posting in. |
Updated 9-12-10 |
Reading through the forum.. I see alot of 4L type trany swaps being done and next to none of the 6L... Well I usually take a road less traveled so I'm doing a 1970 Monte Carlo, 2010 L96/6L90E build.. Come to mention it I saw no MC's at all... I picked up LS1 conversion motor mounts and trany cross member from BRP.. really simple and effective and they bolt into the original locations as the stock mounts. The L96 was a 2010 replacement for the LY6 (so I have been told) it has the L92 heads so I already swapped in a LS3 intake.. The original MAP sensor fit like a glove.. For now I'm going to use the stock TB (I actually like the look, there is nothing sticking out of the side of it like the TB from an LS3) The L96 is E85 ready from the factory (this could be a plus!) I have been looking over how I can re-do the ALT bracket to get it out of the way.. the idler pulley is actual the issue... I found a simple fix... But I really like to have the ALT mounted on the bottom and the power steering pump mounted on the top. The stock PS pump is the remote type which looks alot cleaner.. I think a really cool alternative would be to relocate the ALT to the rear end housing. So as we all know the mods to the trany tunnel is a big limiting factor on using the the 6L auto trany in a build... I thought I had a good idea, in that I would graph in a tunnel from a GTO or newer Camaro.. I was leaning toward the GTO because I have a complete set of seats from a 2006 and thought.. HEY!.. Just graph in a "whole" GTO floor pan... Seems an easy idea... Try to actually locating the floor pan... LOL Fat chance... I have a feeling for now I will just have to cut out the tunnel.... To this point I have mainly been gathering parts (mounts, Be Cool radiator, fuse box...) I still need a MAS (it mistakenly got misplaced when they shipped me the motor and trans)... So there is is... |
66 Buick gets a 5.3 I Recently put a used 5.3 4L60E in my 66 Buick Special. I modded a pair of old Camaro/Chevelle small block headers with some flanges I cut out on a water jet at work. Otherwise it's a stock motor. Its got trans dapt mounts, smaller Dorman power steering pulley, shortened H3 oil pan, Summit aluminum radiator, stock PCM tuned by Texas Speed, stock wire harness (lengthended with extra wires taken out.) Thought some of you guys might appreciate it. http://www.flickr.com/photos/4923216...7625655818635/ |
2 Attachment(s) dont know where to ask this so I will in here 8.1 vortec is it a: lx, lt, ls, or wwjd engine " I am still old old school" |
L92 w/6speed automatic 72chevelle Need help I got a 08 escalade 6.2l with 4wd trans want to put in my 72 chevelle |
All times are GMT -5. The time now is 12:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands