sbc swap into rx7
02-25-2009, 09:12 PM
#1
On The Tree
Thread Starter
sbc swap into rx7 I am wanting to do a sbc 350 swap into a 2nd generation rx7... I have found a good mount kit from hinson supercars for the lsx motors but I was wondering if anyone knew if this kit would work for the older style 350 and also if I will need a custom fabricated oil pan or not and what type of headers people have used with these swaps
Last edited by rouseyss; 02-25-2009 at 09:12 PM. Reason: messed up on wording
02-26-2009, 07:19 AM
#3
On The Tree
Thread Starter
I have found the mount kit does anyone know if I need a custom fabricated oil pan.. All I have at grannys is a kit that includes it and I was going to order the mount kit seperate if someone could help me out it would be greatly appreciated.. Thanks
02-27-2009, 02:17 PM
#5
TECH Apprentice
iTrader: (5)
Join Date: Oct 2007
Location: New Hampshire
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
You need to go to the V8 X7 Forum for specifics. There is a ton of info there. This site is mainly for swaps that use the LS style small block. I think you are talking the older syle Chevy 350 (nothing wrong with that) You will find what you need there. I am a member, if you need info just let me know. I just removed a Vortec 350 and replaced it with a LS style 364 small block. Hope this helps
02-28-2009, 01:55 AM
#6
On The Tree
Thread Starter
I appreciate the info and i will be joining that forum... Yea its a older sbc its a 327 with 400 heads it should be a fun project for us
