Slow 346

iTrader: (33)

Really dont like the looks of the Lokar braided cable. Has anyone tried to use a stock,non traction control cable on their swap? Mine is for a 3rd gen Nova....same as 1st gen camaros....thanks.

bgblockelcamino

iTrader: (9)

i use the f body cable. but think the truck one is a lot shorter and would fit better. i have 86 el camino that i am using it on

WeeWolf

iTrader: (16)

Thats what I was thinking, but I'm using the f body cable on my rx7.

1987earthquake

iTrader: (9)

I'm using one on my 87 camaro

mjls1

iTrader: (1)

I got one on my 71.

ryanvv355

iTrader: (17)

I am using an Express Van cable

Z28/2002

iTrader: (27)

I've got the stock 4th gen cable on my car. I'm looking for something to replace it with because I have about 18" of it under the cowl.

Any of you guys got a part number for something that is shorter and a direct swap for a 4th gen?

Oscar Will

I'm using the F-body cable in my 1935 Ford....it's a little long too.

the_merv

iTrader: (88)

I have the stock LS1 non-TCS Cable on my setup and it's working well.
Try a stock non-TCS LT1 Cable..it's about 10" shorter. It may help well in your situation bro.

supra8

The Lokar LS1 cable is available in a 36" long black housing version that they don't really make well known. Summit number LOK-TC-1000LS1U and instock. I had to search some to find it when I was putting my swap together. This is the only picture I have right now from build stage that shows the cable or should I say shows how it does not show.



Keith

Rodder

iTrader: (2)

I used the silver Lokar cable, and put wire loom (split tubing) over it.

Z28/2002

iTrader: (27)

Thanks Merv, I'll see if I can find one when I get back in a couple weeks

67LS1T56

I used on 67 camaro. I modify a washer to mount the cable in firewal and weld it.