need help from the mustang guys
05-31-2009, 06:58 PM
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Sep 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
need help from the mustang guys I cant seem to get the yoke on the th400 trans to line up center of the saftey loop on my 89 notch. I measured frame rail to frame rail and it seems my yoke come out 1/4 from center of that. But the yoke seems to look like its about 2" off center of the saftey loop.
what gives here, is the saftey loop off center or do the frame rails not the same to check for center
what gives here, is the saftey loop off center or do the frame rails not the same to check for center
