Another Connector ID Request
06-01-2009, 07:33 AM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Another Connector ID Request I traced this back to the PCM connectors and looked it up on the pin-out that I have, but the document says this pin is "not used"
It is off of a 2003 LM7 truck motor
Can anybody tell me what it is? The wire colors are tan, gray and black. Black connector, yellow dust boot. Three pins arranged in a triangle (not flat across)
It is off of a 2003 LM7 truck motor
Can anybody tell me what it is? The wire colors are tan, gray and black. Black connector, yellow dust boot. Three pins arranged in a triangle (not flat across)
06-01-2009, 10:04 AM
#2
TECH Fanatic
iTrader: (9)
Join Date: Aug 2007
Location: Rocky Mtn thin air & snow...
Posts: 1,237
Likes: 0
Received 1 Like
on
1 Post
On my engine (2008 L92) that's the oil pressure, it attaches immediately behind the intake manifold. Same color wires, except that my "tan" wire is "tan w/ white stripe"...
HTH.
HTH.
06-01-2009, 10:29 AM
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Well the oil pressure connector is MIA, so I think you might be right!
Time to get out a flashlight and a mirror and check it out.
Many thanks for your help.
Phil
Time to get out a flashlight and a mirror and check it out.
Many thanks for your help.
Phil