71 chevy

iTrader: (18)

http://cgi.ebay.com/ebaymotors/ws/eB...3D10%26ps%3D63

found out about them on theturboforums. they also have the injected ones for $225

http://www.theturboforums.com/smf/in...23.0;topicseen

NemeSS

iTrader: (127)

look like there original gmpp/wegner design.
should be same thing as gmpp intake

ramdaspadhye

iTrader: (3)

That's where I got mine, they're takeoffs of the nascar motors. Here's some pics...





He has them with or without the threaded boss in the intake runner Just send him a message when you order and he'll send ya one.

Bacon505

iTrader: (1)

I just ordered one yesterday, that part number lists at $503 from Summit or Jegs. Seems like a pretty good score.

john-dickjr

iTrader: (2)

will these intakes fit a 6.0 with L92 heads

NemeSS

iTrader: (127)

negative. these are cathedral port heads, l92 are square port

hotrodscrap

iTrader: (10)

???

-ss

key4

iTrader: (10)

interested in one too. will these fit a LQ4 with 317 heads? Also does anbody know what the rpm range is? Dont know anything about the carb intakes, wanting a good one for my stang build. Its going to have stock ported heads with a cam, powerglide tranny. So what do you guys recommend?

john-dickjr

iTrader: (2)

that picture looks square to me

Bacon505

iTrader: (1)

Here ya go.

http://www.summitracing.com/parts.aspx?sku=NAL-88958675

jostang50

iTrader: (21)

x2 for me, need to know if i can use it with lq4 with 317 heads.

1CAMWNDR

iTrader: (21)

That is not a L93/LS3 port. It is narrow.
Also look where the intake manifold bolts are....in the middle of the runner. The L92/LS3 bolt holes are much lower.

key4

iTrader: (10)

So will it work on the LQ4 with 317 heads? My motor is out of a 2006 truck

1CAMWNDR

iTrader: (21)

Yes, it would work with the 317 casting heads although I would save my money and buy a Victor Jr.

key4

iTrader: (10)

Ok thanks, thats what I will do then. I'm real close to memphis so I will be going to the LSX shoot. I plan on picking some stuff up then so maybe I will beable to pick up a intake.

jostang50

iTrader: (21)

hey key4, let me know how that intake work with your set up

key4

iTrader: (10)

Ok thanks, thats what I will do then. I'm real close to memphis so I will be going to the LSX shoot. I plan on picking some stuff up then so maybe I will beable to pick up a intake.

ramdaspadhye

iTrader: (3)

There's nothing wrong with this intake manifold, and the rpm range between it and the victor junior is marginal. The Vic Jr may have slightly longer intake runners, bumping the poewr up top. These intakes are great for the money and I wouldn't hesitate to buy another one just like it.

Bacon505

iTrader: (1)

Agreed. In this case I don't see why you spend the extra dollars for another intake that does exactly the same thing. It's not like it's some piece of taiwan-ese crap, it a real GMPP manifold. I'd rather have one of these over the edelbrock any day.

Ls1olds

Just ordered one yesterday, cant wait to finally get my motor in and running. I will start a thread as soon as I have the motor together and in the car.