fox to TTLSX
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
fox to TTLSX
I want to build a TTLSX fox just looking for the basic stuff. I want to know what motor mounts to get. I want to punch out a LQ9 to 427 with forged guts, mild cam ,TT and meth inject, Tuned on E85
The baisc stuff I need to know is how to get the motor into the fox
1- Is the AJE kmember all i need to intsall the LSX?
2- Will a Th400 fit under a fox
3- Do I need a adaptor to get the TH400 to work with the LSX?
4- Could I just get the AJE motor mounts for the stock k member? (instead of the AJE k member)
5- What kind of converter will I need? (Needs to be a big stall with a trans brake)
6- How big can u punch out a 5.3?
The baisc stuff I need to know is how to get the motor into the fox
1- Is the AJE kmember all i need to intsall the LSX?
2- Will a Th400 fit under a fox
3- Do I need a adaptor to get the TH400 to work with the LSX?
4- Could I just get the AJE motor mounts for the stock k member? (instead of the AJE k member)
5- What kind of converter will I need? (Needs to be a big stall with a trans brake)
6- How big can u punch out a 5.3?
#2
TECH Enthusiast
iTrader: (3)
I want to build a TTLSX fox just looking for the basic stuff. I want to know what motor mounts to get. I want to punch out a LQ9 to 427 with forged guts, mild cam ,TT and meth inject, Tuned on E85
The baisc stuff I need to know is how to get the motor into the fox
1- Is the AJE kmember all i need to intsall the LSX?
2- Will a Th400 fit under a fox
3- Do I need a adaptor to get the TH400 to work with the LSX?
4- Could I just get the AJE motor mounts for the stock k member? (instead of the AJE k member)
5- What kind of converter will I need? (Needs to be a big stall with a trans brake)
6- How big can u punch out a 5.3?
The baisc stuff I need to know is how to get the motor into the fox
1- Is the AJE kmember all i need to intsall the LSX?
2- Will a Th400 fit under a fox
3- Do I need a adaptor to get the TH400 to work with the LSX?
4- Could I just get the AJE motor mounts for the stock k member? (instead of the AJE k member)
5- What kind of converter will I need? (Needs to be a big stall with a trans brake)
6- How big can u punch out a 5.3?
1-The AJE k-member is all you need for the motor to sit in the fox...
2- Yes, fits like it was meant to be there. I have a 4l80e in mine with no problems.
3-No adapters needed, just a certain converter I believe(Auto Trans section has tons of info on this!)
4-No
5-not sure
6-you do know a lq9 is a 6.0L right?