22lambo

iTrader: (1)

I need to convert the wire to the throttle body to be a cable. Could I just put a ls1 throttle and have it work? I would like to know what is the way I can have a cable on the LQ4. Thanks.

poconojoe

iTrader: (43)

A lot would depend on the on the year, etc.
You need to switch the throttle body for a cable,
Add the IAC, and TPS wiring to the harness,
Have the PCM flashed with a DBC OS, not all DBW PCM's can be flashed to DBC, since they don't have IAC drivers in them

22lambo

iTrader: (1)

It's out of a 2006 Sierra. Could I use a LS1 PCM?

poconojoe

iTrader: (43)

What color is the crank sensor plug?

22lambo

iTrader: (1)

Where is it? I couldn't really find it in the time I had.

Pocket

iTrader: (22)

Behind the starter

Black = 24x
Gray = 58x

22lambo

iTrader: (1)

Thanks! So what's the deal with the colors then, if it's gray I can't use the LS1 PCM or something?

alitz

Bump so will it work with a black plug???

Schwanke Engines

iTrader: (1)

You could send me your PCM and I will get you the right PCm for the job. If it is an LQ4, it is more than likely a 24x. If it is grey, you will not be able to run cable as there are no IAC motor drivers in any of the 58x controllers.

alitz

How much and do you happen to have the cables??

Schwanke Engines

iTrader: (1)

If you are getting just a base cal, it will be $185.99. We have 36" Lokar LS1 cables for $55.

There are probably some other things that you need. Give me a call and I will get a complete list together.