LS1 cam kit
09-06-2010, 03:41 PM
#3
Teching In
Thread Starter
Join Date: Feb 2010
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
My goal is to have the car sounding good and loud but also fast....more of a street car then anything....the motor is not in the car yet but some people say its eazy to put in the cam when the motor is out...
09-06-2010, 09:25 PM
#5
On The Tree
iTrader: (3)
Join Date: Feb 2008
Location: Rochester, Ny
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
This is like asking for shoes over the phone in an other language!
What tranny are you using, rear gear ratio, weight of the car, mods to the engine, compression ratio, heads, work done to the heads, valve springs in the heads, what are your expectations for the car. DO you want performance mild or wild? track car, street/strip, grocery getter.
Man there's a **** ton to consider than just saying hey recommend me a cam that may work in XXXXXX. Every cam is different in every set up, it's like comparing apples and elephants.
What tranny are you using, rear gear ratio, weight of the car, mods to the engine, compression ratio, heads, work done to the heads, valve springs in the heads, what are your expectations for the car. DO you want performance mild or wild? track car, street/strip, grocery getter.
Man there's a **** ton to consider than just saying hey recommend me a cam that may work in XXXXXX. Every cam is different in every set up, it's like comparing apples and elephants.
