Took the engine apart and cleaned it up a bit. http://img.photobucket.com/albums/v4...p/100_3304.jpg http://img.photobucket.com/albums/v4...p/100_3306.jpg http://img.photobucket.com/albums/v4...p/100_3307.jpg http://img.photobucket.com/albums/v4...p/100_3310.jpg http://img.photobucket.com/albums/v4...p/100_3312.jpg http://img.photobucket.com/albums/v4...p/100_3318.jpg http://img.photobucket.com/albums/v4...p/100_3319.jpg http://img.photobucket.com/albums/v4...p/100_3320.jpg http://img.photobucket.com/albums/v4...p/100_3323.jpg http://img.photobucket.com/albums/v4...p/100_3324.jpg http://img.photobucket.com/albums/v4...p/100_3326.jpg http://img.photobucket.com/albums/v4...p/100_3327.jpg http://img.photobucket.com/albums/v4...p/100_3328.jpg http://img.photobucket.com/albums/v4...p/100_3336.jpg http://img.photobucket.com/albums/v4...p/100_3337.jpg http://img.photobucket.com/albums/v4...p/100_3340.jpg |
Got 6 used ls3 intake valves off a member here http://img.photobucket.com/albums/v4...p/100_3342.jpg http://img.photobucket.com/albums/v4...p/100_3343.jpg http://img.photobucket.com/albums/v4...p/100_3348.jpg Kwik performance brackets So I can use the truck crank pulley but have the acc in vette locations http://img.photobucket.com/albums/v4...p/100_3371.jpg Ls3 oil pan http://img.photobucket.com/albums/v4...100_3374-1.jpg http://img.photobucket.com/albums/v4...100_3373-1.jpg http://img.photobucket.com/albums/v4...100_3375-1.jpg |
Compared the truck pan to the vette pan http://img.photobucket.com/albums/v4...p/100_3396.jpg http://img.photobucket.com/albums/v4...p/100_3397.jpg http://img.photobucket.com/albums/v4...p/100_3398.jpg http://img.photobucket.com/albums/v4...p/100_3399.jpg http://img.photobucket.com/albums/v4...p/100_3400.jpg http://img.photobucket.com/albums/v4...p/100_3403.jpg The truck's windage tray that Ill trim to fit with the vette pick-up http://img.photobucket.com/albums/v4...p/100_3401.jpg http://img.photobucket.com/albums/v4...p/100_3402.jpg |
Tore the engine apart some more since it was so nice out for a change. http://img.photobucket.com/albums/v4...p/100_3412.jpg http://img.photobucket.com/albums/v4...p/100_3414.jpg http://img.photobucket.com/albums/v4...p/100_3415.jpg Looks like crap but its just flaky carbon or something, whatever it is it vacuums right up. http://img.photobucket.com/albums/v4...p/100_3417.jpg http://img.photobucket.com/albums/v4...p/100_3419.jpg http://img.photobucket.com/albums/v4...p/100_3418.jpg Got a fbody waterpump and 1 1/2" spacers http://img.photobucket.com/albums/v4...p/100_3416.jpg http://img.photobucket.com/albums/v4...p/100_3421.jpg Found a crack in the valvecover! The cover was orginally crooked with 3 out of the 4 bolts bent so I was surprised that it wasnt cracked but not surprised anymore. Haha. http://img.photobucket.com/albums/v4...p/100_3420.jpg ^ the piece sticking up is the torn gasket |
Cleaned the pistons a tad http://img.photobucket.com/albums/v4...p/100_3422.jpg http://img.photobucket.com/albums/v4...p/100_3424.jpg http://img.photobucket.com/albums/v4...p/100_3425.jpg http://img.photobucket.com/albums/v4...p/100_3426.jpg Also ordered the: Clutch kit Cam kit Head and cam install kit Arp rod bolts underdrive pulley 2 ls3 intake valves Various bolts and gaskets Got a 2.2 powersteering pump, vette pwr steering pressure hose, vette tensioner and various bolts coming from a friend that works at a autoparts store. Should have everything I need to get the engine back together, until I find out more stuff I may need. |
Thanks to a buddy of mine for hooking me up on a 2.2 s10 powersteering pump with pulley for a 3.4 camaro, Pressure hose for a vette, ls1 vette tensioner, Intake bolts, and Starter bolts. http://img.photobucket.com/albums/v4...p/100_3428.jpg Also ordered: Clutch kit Cam kit Head and cam install kit Arp rod bolts underdrive pulley 2 ls3 intake valves Various bolts and gaskets Should have everything I need to get the engine back together, until I find out more stuff I may need. |
Disassembled the heads http://img.photobucket.com/albums/v4...p/100_3434.jpg http://img.photobucket.com/albums/v4...p/100_3433.jpg http://img.photobucket.com/albums/v4...p/100_3431.jpg http://img.photobucket.com/albums/v4...p/100_3435.jpg They need to be cleaned up a bit. And got THE BOOK. http://img.photobucket.com/albums/v4...p/100_3430.jpg |
I swear that the ups man is better then santa! Heres some goodies he dropped off. PRC .675" double valvesprings, retainers, springs seats and valve stem seals http://img.photobucket.com/albums/v4...p/100_3438.jpg Texas speed pushrods http://img.photobucket.com/albums/v4...p/100_3439.jpg TSP vvt-2 cam ground by comp You can see the holes in the 2nd journal for oil to pass into the cam for the phaser http://img.photobucket.com/albums/v4...p/100_3450.jpg http://img.photobucket.com/albums/v4...p/100_3451.jpg http://img.photobucket.com/albums/v4...p/100_3452.jpg Phaser limiter to keep the valves from hitting the pistons, incase the computer doesnt react fast enough. http://img.photobucket.com/albums/v4...p/100_3449.jpg Timing cover seals and water pump gasket http://img.photobucket.com/albums/v4...p/100_3441.jpg Vette dipstick and powersteering resivour http://img.photobucket.com/albums/v4...p/100_3442.jpg Powerbond 25% underdrive pulley and dampener bolt http://img.photobucket.com/albums/v4...p/100_3443.jpg Dampener install tool. http://img.photobucket.com/albums/v4...p/100_3444.jpg Head gaskets http://img.photobucket.com/albums/v4...p/100_3445.jpg 2 ls3 intake valves that I needed yet http://img.photobucket.com/albums/v4...p/100_3446.jpg ARP2000 rod bolts http://img.photobucket.com/albums/v4...p/100_3448.jpg GM headbolts http://img.photobucket.com/albums/v4...p/100_3453.jpg This is what an extra bedroom is for. http://img.photobucket.com/albums/v4...p/100_3454.jpg |
More heavy items. Monster Level 3 clutch kit w/ gm slave http://img.photobucket.com/albums/v4...p/100_3473.jpg And real LS3 intake valves!! Since I was sent the wrong valves new and used. http://img.photobucket.com/albums/v4...p/100_3474.jpg http://img.photobucket.com/albums/v4...p/100_3476.jpg Comparison, Ls3 vs L92 http://img.photobucket.com/albums/v4...p/100_3477.jpg http://img.photobucket.com/albums/v4...p/100_3478.jpg |
Looks like you bought a lot of nice stuff - now get it into the truck already! :burn: |
Thanks! Just have to get radiator, wiring harness/ecu, and the trans then all the big stuff will be done. |
I just picked up a radiator from Jegs for my LS1/S10 swap and it's top notch. I got the Jegs brand universal fit 28x16.5 and it's a beast. Dual 1" rows and tig welded tanks with a billet filler neck. I was very impressed for $160. I trimmed the intrepid fans to fit it today and it was a piece of cake. |
Originally Posted by ss454327
(Post 14591381)
I just picked up a radiator from Jegs for my LS1/S10 swap and it's top notch. I got the Jegs brand universal fit 28x16.5 and it's a beast. Dual 1" rows and tig welded tanks with a billet filler neck. I was very impressed for $160. I trimmed the intrepid fans to fit it today and it was a piece of cake. |
Originally Posted by Stormed_Norm
(Post 14591471)
How's that one fit into the cradle? Any pics of that? Any trimming? |
Is the outlet and inlet of that radiator both on the same side? Im going to go with the one that Current performance makes since it is a direct swap in with no cutting but you definately pay a hefty price for it. |
Well got the heads done. Bare http://img.photobucket.com/albums/v4...p/100_3485.jpg PRC Spring seats http://img.photobucket.com/albums/v4...p/100_3486.jpg Valve stem Seals http://img.photobucket.com/albums/v4...p/100_3487.jpg Done http://img.photobucket.com/albums/v4...p/100_3489.jpg http://img.photobucket.com/albums/v4...p/100_3488.jpg Went to Summit and picked up valve cover gaskets ARP pressure plate and flywheel bolts http://img.photobucket.com/albums/v4...p/100_3491.jpg And the clutch master cylinder. http://img.photobucket.com/albums/v4...p/100_3492.jpg Got the block ready to be assembled http://img.photobucket.com/albums/v4...p/100_3480.jpg http://img.photobucket.com/albums/v4...p/100_3481.jpg http://img.photobucket.com/albums/v4...p/100_3482.jpg |
What is the advantage of the LS3 intake valve over the LY6/L92 valve? |
Also the Ls3 valve weighs upper 80s grams and the L92 weighs around 110 grams. Lighter valvetrain = happy valvetrain. |
Heres some pics of the weekend. http://img.photobucket.com/albums/v4...p/100_3493.jpg http://img.photobucket.com/albums/v4...p/100_3494.jpg http://img.photobucket.com/albums/v4...p/100_3495.jpg http://img.photobucket.com/albums/v4...p/100_3498.jpg http://img.photobucket.com/albums/v4...p/100_3499.jpg TSP VVT-2 on left stock on right http://img.photobucket.com/albums/v4...p/100_3501.jpg http://img.photobucket.com/albums/v4...p/100_3503.jpg http://img.photobucket.com/albums/v4...p/100_3504.jpg Inside workings of the phaser. The gear is part of the outer shell and the cam is attached to the inner part with tabs that when rotated bottom out on the walls. You can see the limiter block I installed in the lower chamber to the left of the pivot bolt of the outer cover. http://img.photobucket.com/albums/v4...p/100_3509.jpg http://img.photobucket.com/albums/v4...p/100_3510.jpg http://img.photobucket.com/albums/v4...p/100_3513.jpg Arp rod bolts on some of the rods. http://img.photobucket.com/albums/v4...p/100_3514.jpg Vette pick-up tube fit the truck windage tray just fine. http://img.photobucket.com/albums/v4...p/100_3518.jpg http://img.photobucket.com/albums/v4...p/100_3519.jpg http://img.photobucket.com/albums/v4...p/100_3520.jpg http://img.photobucket.com/albums/v4...p/100_3522.jpg http://img.photobucket.com/albums/v4...p/100_3523.jpg http://img.photobucket.com/albums/v4...p/100_3524.jpg http://img.photobucket.com/albums/v4...p/100_3525.jpg http://img.photobucket.com/albums/v4...p/100_3527.jpg http://img.photobucket.com/albums/v4...p/100_3529.jpg http://img.photobucket.com/albums/v4...p/100_3532.jpg http://img.photobucket.com/albums/v4...p/100_3533.jpg http://img.photobucket.com/albums/v4...p/100_3534.jpg http://img.photobucket.com/albums/v4...p/100_3535.jpg http://img.photobucket.com/albums/v4...p/100_3539.jpg http://img.photobucket.com/albums/v4...p/100_3540.jpg http://img.photobucket.com/albums/v4...p/100_3550.jpg http://img.photobucket.com/albums/v4...p/100_3551.jpg http://img.photobucket.com/albums/v4...p/100_3552.jpg |
All times are GMT -5. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands