devlmaycry

iTrader: (2)

I'm searching for a set of C6 LS2 2 bolt manifold flanges for my swap. I've tried googling and searching here, but I haven't found anything. I've seen some "universal" flanges, but would rather have something I know is going to fit esp. with as little room as I have.

Thanks for any input!

FastKat

iTrader: (10)

I've seen them on eBay. There was also someone on the board here that was selling them. I think Stainless Works also had them.

You might have to look around, but I know they're out there. I wound up making mine out of a piece of 1/2" stainless plate with a drill press and angle grinder.

72ls1nova

iTrader: (2)

have you checked mandrel-bends.com?

Earl Filter

iTrader: (1)

I'd find some stock cats and cut the flanges off. I just bought C6 exhaust manifolds, cats, and h-pipe for $150. The flanges at either end of the cats will work.

devlmaycry

iTrader: (2)

I just looked at mandrel-bends and all they have are the universal style. My build thread shows how little room I have. I really need flanges that are designed just for this manifold. I appreciate all the help though!

I looked on ebay for some exhaust pieces, and am still searching, but nothing too promising yet. I also emailed stainless works hopefully they can hook me up.

69AMX364

Road Race Engineering 4G Eclipse Parts and Performance
Don't remember which exact flange I used, 2.75 pipe, bolt hole spacing needed to be filed about 1/8 inch. Gasket from GM Dealer

FastKat

iTrader: (10)

Check this thread:

https://ls1tech.com/forums/parts-cla...s-ls2-ls3.html

And here...
https://ls1tech.com/forums/lsx-parts...manifolds.html

These guys might be able to help you out.
https://ls1tech.com/forums/new-produ...d-flanges.html

devlmaycry

iTrader: (2)

Ah, yeah 6speeder. I pm'd him earlier today haven't heard back yet, but I'm hoping he might still have some.

devlmaycry

iTrader: (2)

still haven't found a set of flanges for my setup.

jeepnut24

I cut mine out of 1/4" steel. Ive got a set of stock cats though, that I might pull the flanges off if needed. But I think these should work. I know of a buggy that is running a set of 1/4" just like these and no leaks.

Drill, hole saw, angle grinder, and a sharpie to trace the shape...

devlmaycry

iTrader: (2)

Hmmm... this might work. Just wish I had access to the tools to do it.

LonghornSS

try a place called SPD Exhaust. They have all kinds of header and exhaust components

here is a link to their 2 bolt flanges
http://www.spdexhaust.com/2BoltB.html