85 Chevy Truck with 390ci iron stroker
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Aug 2010
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
85 Chevy Truck with 390ci iron stroker
This technically isn't a real build thread yet, just a precusor to what is coming when I return from Afghanistan. I got the truck in late October '09 with no motor, old faded paint, ugly interior, no motor or trans and some minor body damage.
Humble beginnings:
How she sits today:
I put the 305 that it came with in it along with a th350 w/shift kit. I took it to the strip once for ***** and giggles and it was slow to say the least. 17.69 at 73.86 mph. Little embarassing to say the least.
I won't be so reluctant to take it to the strip once I get back from Afghanistan. I have a 2004 LQ4 6.0L that I am stroking to 390" using an AES forged bottom end with dish pistons. I had a custom cam spec'd by Patrick G, 230/234 .600”/.602” 111LSA +4 advance. I will keep the top end pretty stock for now and slowly add parts. I will eventually put a turbo on it when I have the $$$. I am hoping to have at least 375-400 rwhp N/A.
New Heart:
I am also building a 9" with Strange Nodular N center, 35 spline detroit, 3.50s and moser axles.
I will keep ya'll updated with pcitures and parts ordering.
Humble beginnings:
How she sits today:
I put the 305 that it came with in it along with a th350 w/shift kit. I took it to the strip once for ***** and giggles and it was slow to say the least. 17.69 at 73.86 mph. Little embarassing to say the least.
I won't be so reluctant to take it to the strip once I get back from Afghanistan. I have a 2004 LQ4 6.0L that I am stroking to 390" using an AES forged bottom end with dish pistons. I had a custom cam spec'd by Patrick G, 230/234 .600”/.602” 111LSA +4 advance. I will keep the top end pretty stock for now and slowly add parts. I will eventually put a turbo on it when I have the $$$. I am hoping to have at least 375-400 rwhp N/A.
New Heart:
I am also building a 9" with Strange Nodular N center, 35 spline detroit, 3.50s and moser axles.
I will keep ya'll updated with pcitures and parts ordering.