Yep - Another 1969 Camaro with an LS2
05-02-2011, 11:29 AM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Yep - Another 1969 Camaro with an LS2 Hi All,
Figured that I would chronicle my build on here. I am putting an LS2 into my 1969 camaro with the help of my dad and brother.
pics are big so I am gonna fix this and repost...
Build Parts:
LS2 from a TBSS (THANKS DAYTONAYELLAZ)
Mast Oil Pan
Speartech Harness
Stainless Works Headers
S&P Mounts
LS1 F-Body Accessories (with the KWIK conversion for AC), Radiator & Fans
ATS (SpeedTech) T56 Crossmember
Figured that I would chronicle my build on here. I am putting an LS2 into my 1969 camaro with the help of my dad and brother.
pics are big so I am gonna fix this and repost...
Build Parts:
LS2 from a TBSS (THANKS DAYTONAYELLAZ)
Mast Oil Pan
Speartech Harness
Stainless Works Headers
S&P Mounts
LS1 F-Body Accessories (with the KWIK conversion for AC), Radiator & Fans
ATS (SpeedTech) T56 Crossmember
Last edited by Taylor1969; 05-02-2011 at 12:07 PM.
05-02-2011, 11:37 AM
#2
Teching In
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Old Intake
New Intake
S&P Mounts Installed
Wow... the mast pan is slightly different than the stock one...
out with the old...
and in with the new...
New Intake
S&P Mounts Installed
Wow... the mast pan is slightly different than the stock one...
out with the old...
and in with the new...
Last edited by Taylor1969; 05-02-2011 at 11:46 AM.
05-02-2011, 11:51 AM
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Had a few problems with the stock 1969 Camaro mounts... Had to swap them out for the mounts from a 72 Chevelle - after that the engine went right in. On to the clutch, crossmember and headers.
clutch
ATS (Speed Tech) Crossmember and Stainless Works Headers installed
clutch
ATS (Speed Tech) Crossmember and Stainless Works Headers installed
