Hello
#1
Hello
Hello newbie, i have a 87 T buick puting a 6.0LQ9 turbo , looking for a aluminum intake with fuel rail and plantum. your help would mean alot..
thank's miguel
thank's miguel
Last edited by HOT ROD-GN; 07-03-2011 at 10:03 PM.
#2
Welcome. You should be able to find the items you need at Summit, or Pace performance or even SD-Parts. If you aren't in too much of a hurry, you can try the classified section https://ls1tech.com/forums/parts-cla..._second_pass=1
#3
On The Tree
iTrader: (3)
miguel-
here is the intake you want
http://www.summitracing.com/parts/EDL-7139/
edelbrock pro flo xt efi, u can get fuel rails , re-use your stock 6.0L throttle body, or get the edlebrock.
if your going turbo, this is the intake for the money.
It also will fit under your hood.
I have a twin turbo 6.0 Lq4 and everything cleared my hood by an inch or so. good luck with the build
here is the intake you want
http://www.summitracing.com/parts/EDL-7139/
edelbrock pro flo xt efi, u can get fuel rails , re-use your stock 6.0L throttle body, or get the edlebrock.
if your going turbo, this is the intake for the money.
It also will fit under your hood.
I have a twin turbo 6.0 Lq4 and everything cleared my hood by an inch or so. good luck with the build