Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine Guides
- Camaro and Firebird: Differences Between LS Engines
Important information to help you understand your Camaro or Firebird
Browse all: Engine Guides
LSx engine swap guides
#42
Tac problem
Hello everyone I got a problem if anyone could help. I did a 5.3 Drive By Wire swap in a 1964 Chevy truck. The truck don't start when I have the TAC MODULE Box plugged in. When TAC is plugged in the fuel pump relay chatters and wont start. But when I unplug the TAC MODULE it starts right up. QUESTION when I first put it in it all worked fine then just quit out of no where. Do the TAC MODULES quit out of nowhere
#43
wiring harness help
Hello everyone I got a problem if anyone could help I'm building a 1950 chevy pickup truck with 2006 5.3 engine plan to install 2008 intake manifold drive by cable throttle and 4l60e trans. I have 2000 Silverado wire harness with the red and blue computer drive by cable also. somebody have schematics for this application any help be appreciated thank you.
#44
On The Tree
iTrader: (1)
Hello everyone I got a problem if anyone could help I'm building a 1950 chevy pickup truck with 2006 5.3 engine plan to install 2008 intake manifold drive by cable throttle and 4l60e trans. I have 2000 Silverado wire harness with the red and blue computer drive by cable also. somebody have schematics for this application any help be appreciated thank you.
#45
On The Tree
iTrader: (11)
Join Date: Jan 2011
Location: The forsaken tundra of Minnesota
Posts: 123
Received 0 Likes
on
0 Posts
Guys ^^ the best 70 bucks I ever spent on my build was to buy the factory shop manuals for my donor car off ebay. Granted 3/4s of the F body books is useless for a Miata but the rest is priceless!
#46
#47
#48
On The Tree
iTrader: (1)
https://ls1tech.com/forums/conversio...x-w-5-3-a.html
#51
yes please. or at least some DIY stand alone wire harness mods on gen III LS1 cause that's what most kids are using these days. or any info on 240sx/LSX swaps would be nice. shameless plug...silviav8dotcom is a good site too.
#52
#53
Registered User
Join Date: Mar 2014
Location: manteca,ca
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#55
On The Tree
iTrader: (11)
Join Date: Jan 2011
Location: The forsaken tundra of Minnesota
Posts: 123
Received 0 Likes
on
0 Posts
Go hang out with these guys
http://www.pro-touring.com/forums/75-The-LSX-Forum
http://www.lateral-g.net/forums/forumdisplay.php4?f=70
http://www.pro-touring.com/forums/75-The-LSX-Forum
http://www.lateral-g.net/forums/forumdisplay.php4?f=70
#57
Probably done to death but more 240sx LS1 swap guide stuff.
http://my.prostreetonline.com/2013/0...-into-a-240sx/
http://my.prostreetonline.com/2013/0...-into-a-240sx/
#59
Registered User
Join Date: Jun 2014
Location: Richmond Virginia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hey forum I'm new to this but this far I like this. I am thinking about doing a engine swap to my 2004 Lincoln ls v8 with the ls1. The Lincoln ls has the jaguar engine and the two engines look identical. To me when I look at both they look exactly the same. Just the valve covers are shaped different. What I would like to know is would the ls1 fit into the body of the Lincoln ls? I know I would have to modify the motor mounts. As far as transmission and pcm and other electric components would I have a lot to take on?
#60
Registered User
Join Date: Jun 2014
Location: Richmond Virginia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Can you swap out the factor Lincoln ls 3.9 motor and transmission with the ls1 motor and trans? They both look identical, and would I have to swap the pcm out of the Lincoln or rewire a ls1 pcm?