LSx engine swap guides
 

As an attempt to clean up and organize the stickies a little better I am going to try and list all of the swap guides that I can find in this sticky.

General LS swap guides.
https://ls1tech.com/forums/conversio...de-1500-a.html

Vehicle specific

GM A-Body
https://ls1tech.com/forums/conversio...2-gm-body.html

F-Body
(LT1 to LS1)
https://ls1tech.com/forums/conversio...on-sticky.html
(V6 to LS1)
https://ls1tech.com/forums/conversio...-w-pics-2.html

67-69 f-bodies
https://ls1tech.com/forums/conversio...ro-basics.html

G-Body
http://www.montecarloss.com/ls1montecarloss/

X-Body
https://ls1tech.com/forums/conversio...ap-thread.html

1967-72 Trucks
https://ls1tech.com/forums/conversio...-stepside.html

BMW E30 (325 series)
http://forums.bimmerforums.com/forum....php?t=1348710
I will post more of these as I find them, so if you have a thread that should be listed in this sticky please PM me.

Any guides for LS1 to LQ4 or LS1 to LY6 or LS1 to 5.3?

Junkie, those are all pretty much the same engines why have an FAQ for each?

G35 350z. Fafonfoe has one, snyper has several royal T has one as well. I'll have one come winter ;)

e36
 

https://ls1tech.com/forums/conversio...-bmw-357i.html


good thread covers most of the major work done. Very enlightening.

Need a Guide for 2nd generation F Body
 

Can you add a link for 70-81 Camaros and Firebirds? It will be greatly appreciated.

hey can any one tell me do ls heads fit on lsx block?i've got no idea. thanks

Any informative, complete info on 94-96 B bodies, Impala SS & Caprice? Thanks

-SS

65-66 (or 65-70) B Bodies would be awesome... I'm quite surprised that these swaps don't seem to be more popular with those cars.

There a thread on the impala ss forum but it will be great to have a step by step thread on here too

Anyone know if there is a guide to wiring harness modification on this site? I'm looking to convert a regular truck harness to stand alone.

I know some has to have a thread for a V6 To LS swap somewhere? anyone have a link?

looking for the same thing as viper..

https://ls1tech.com/forums/conversio...-6-7l-t56.html

That was a 1998, 1999 isnt too much different. 1993-1997 is a little more different, but not much from my 1995.

S10 swap
 

I am putting an ls1 out of a 99 camaro in a s10 and I can't find an AC bracket

how do you put an ls6 motor in a foxbody mustang

Lt1swap.com has a lot of info on harness modification and can also program your PCM.

Porsche 944 conversions.

Texas Performance Concepts

and

Rengade Hybrids

ls swap in my hotrod
 

newbe to this forum here. I put an 2004 GTO ls1 in my hotrod. the collectors for the stock exhaust manifolds interfere with my motor mounts. i've seen stock manifolds where the collectors are under or behind the last cylinder. what are they from and where is a good place to find them? 2nd, the thermostat housing points out towards the passenger side, I think i've seen some point straight out towards the front, again what are they from and where is the best place to find it? trying to avoid high dollar parts. Any help is appreciated.
ray

Hey guys, does anyone know if you can swap an old stock 350 tbi in a 87 4X4 sierra with a 6.0 litre motor and still use the 700r4 trans and original transfer case? Will the motor mounts need to be moved? etc? Thanks