68BBChevelle

iTrader: (12)

I know this has been beat to death but i cant find all my answers. Im swapping to a Ls1 intake on my Lq4. Already know about water pump and idler pulley issue. I ran into a problem with my fuel rail hitting number 5 coil pack. I know i could go aftermarket rails but don't really want to. I saw i could switch out the coil packs for car ones. Now can i just switch that one pack or do i have to do the whole side? If have to do the whole side will the car bracket bolt to the truck valve cover? Thanks for the help.

LS1MCSS

iTrader: (18)

Most people just bend the line enough to clear if they don't want to swap both coil packs.

psiconversion

iTrader: (5)

Second that. We did the same thing when we converted to DBC LS6 intake on a TBSS LS2.

Jon
PSI

68BBChevelle

iTrader: (12)

Can i just change #5 pack to a car one as it plugs on the side instead of the top where i need the clearance?

2165 Turbo Rail

iTrader: (1)

just bent mine a little

NemeSS

iTrader: (127)

Just bend it a bit. No prob

68BBChevelle

iTrader: (12)

Ok Thanks