beach cruiser

iTrader: (1)

I'mounting my coilpaks remotely from the motor, Does anyone know what wires will work? I don't mind making a universal kit work, but which kit has the boots that are sized for the LS1 coils? I tried a small block set and the boots are too small.

usc2001gc

iTrader: (1)

Look at the MSD 32079.

MIKE93SVT

iTrader: (6)

lt1 wires have the same boots

Track_FC

iTrader: (2)

Where do you plan on mounting them?

TomM

iTrader: (56)

Try these.....


Super Conductor, Black, 25' Bulk Wire
P/N 34013

LS1, 45-degree boots & terminals
P/N 3304

Silicone straight boots & Terminals
P/N 3301

stcloudguy

I used a kit from Taylor wire for my '71 Nova, they came with the coil end on them and just had to cut to length and put the plug end on them. Very happy with them. The kit came with 60" of wire, leaves you lots of options.

beach cruiser

iTrader: (1)

great info guys! It's a LS1 swap in a 67 Camaro, I want to put the coils down low, perhaps on the back side of the cross member near the motor mount. It's a custom built subframe with C5 suspension, I'll need a 90 boot on the plug side, I'll look at those part numbers and see what works best for me. Thanks for all the help!

MIKE93SVT

iTrader: (6)

here's a good thread for ideas


http://www.yellowbullet.com/forum/sh...ight=coilpacks

beach cruiser

iTrader: (1)

I'd really like to mount them behind the firewall but I'm concerned about emf with the radio and ECM. Should I be concerned?