408ci, Pro Mod 88 turbo, 93 Mustang coupe.
02-08-2013, 01:35 AM
#81
Benny, I get to drive this next time I'm home and it's running right!?! lol
Jeremy (FatFab) does great work, helped me with my evo and tuned it to a 535awhp mark with stock LICP, unported head, stock short block, stock intake and turbo manifolds, and stock frame turbo on a (believe it or not) safe tune
Jeremy (FatFab) does great work, helped me with my evo and tuned it to a 535awhp mark with stock LICP, unported head, stock short block, stock intake and turbo manifolds, and stock frame turbo on a (believe it or not) safe tune
02-15-2013, 12:16 PM
#83
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Quick update.
Sold my blue 87 coupe finally! Now I'll be ordering a few more goodies for this car - starting with a Team-Z mini tub kit
Still gotta order an intake, probably Holley HiRam, or their mid rise modular intake if the HiRam won't clear the hood.
Here is a quick pic of some sick overhead chromoly cage welds Fathouse somehow conjured up with his mad skills:
Sold my blue 87 coupe finally! Now I'll be ordering a few more goodies for this car - starting with a Team-Z mini tub kit
Still gotta order an intake, probably Holley HiRam, or their mid rise modular intake if the HiRam won't clear the hood.Here is a quick pic of some sick overhead chromoly cage welds Fathouse somehow conjured up with his mad skills:
02-18-2013, 03:34 PM
#86
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
05-08-2013, 07:05 PM
#87
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Been a while, but work is getting done on the car! Should have it back in a while to finish it up and get it racing by the end of summer.
Team Z mini-tub kit, anti-roll bar, strange shocks, + Team Z suspension.
Team Z mini-tub kit, anti-roll bar, strange shocks, + Team Z suspension.
05-18-2013, 08:36 PM
#88
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Stopped by Fathouse Fabrications this morning to drop some stuff off/pick some stuff up and snapped some pics while I was there!
Cage-frame cross member with upper shock mounts added.
Rear end pulled for work - Team Z anti roll bar, upper/lower control arms, and welded/reinforced torque boxes.
Close up of the Team-Z ARB and welded upper torque boxes.
Drivers side mini tub - will be painted soon.
Passenger side mini tub - will be painted soon.
Drivers side wheel well - soooo much room for rubber
Finishing up some grinding on the rear end housing after installing Team Z coilover shock mounts and infinite adjustable instant center brackets. Very cool pieces, should help dial in those 60ft times
Turbo location in front bumper.
Motor plate - rough cut to be low slung, still needs trimmed to clear boost-making junk.
Engine bay with mid plate and front motor plate mounts in place.
Strange Engineering coilovers we switched to in the back. I've heard these same model shocks have been reliable on deep 7sec cars, so hopefully they will be good for us from 8.50-9.0!
More updates to come soon!
Cage-frame cross member with upper shock mounts added.
Rear end pulled for work - Team Z anti roll bar, upper/lower control arms, and welded/reinforced torque boxes.
Close up of the Team-Z ARB and welded upper torque boxes.
Drivers side mini tub - will be painted soon.
Passenger side mini tub - will be painted soon.
Drivers side wheel well - soooo much room for rubber
Finishing up some grinding on the rear end housing after installing Team Z coilover shock mounts and infinite adjustable instant center brackets. Very cool pieces, should help dial in those 60ft times
Turbo location in front bumper.
Motor plate - rough cut to be low slung, still needs trimmed to clear boost-making junk.
Engine bay with mid plate and front motor plate mounts in place.
Strange Engineering coilovers we switched to in the back. I've heard these same model shocks have been reliable on deep 7sec cars, so hopefully they will be good for us from 8.50-9.0!
More updates to come soon!
05-19-2013, 11:42 AM
#92
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Thanks LILHEMI! 
Very much so - I have been blown away over and over again by the work these guys do.
Me too - It's an AEI LS Pro universal plate. I can't remember if it's the .25 or .375 though. http://www.aeicnc.com/ls-pro-univers...-x-361236.html The mid plate is a Skinny Kid Race Cars setup.
I can't wait to start making boost again
Very much so - I have been blown away over and over again by the work these guys do.
Me too - It's an AEI LS Pro universal plate. I can't remember if it's the .25 or .375 though. http://www.aeicnc.com/ls-pro-univers...-x-361236.html The mid plate is a Skinny Kid Race Cars setup.
I can't wait to start making boost again
05-20-2013, 10:54 AM
#94
Staging Lane
Thread Starter
Join Date: Sep 2010
Location: Carmel, IN
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
06-30-2013, 03:09 PM
#97
8 Second Club
