andysfbird

Hello,
My 67 Firebird came with a 326 engine with a 2 speed automatic column shift transmission. I'm in the process of installing a LS1 with a T56 manual transmission. So, of course there is no clutch pedal darnit! I Understand that I also need a new accelerator pedal to accommodate the installation of an accelerator cable for the new engine. I'm now left with only a brake pedal. Instead of potentially ending up with three different type of pedals, isnt there someone out there making a three pedal assembly for my application? Can I get some help with this guys?

67firebird

there are a couple clutch and brake pedal assemblies on ebay. buy a lokar gas pedal with the matching pads for the clutch and brake.

Old Kid

1st gen Camaro clutch/brake assemblies are available from restoration parts suppliers and are not expensive. I used the gas pedal and cable from a late model Chevy van ($10 at local junk yard). Modded slightly to fit.

andysfbird

Thanks man, ill check these leaeds out for sure!

andysfbird

Has anybody had experience with using stock 67 clutch pedal assembly and turning it into a hydraulic system?

67firebird

im in the process now of doing it. american powertrain has a complete set-up. copy and paste this link.

http://americanpowertrain.com/i-8521...c-bearing.html

andysfbird

did the clutch you recommended to me fit your application?

http://americanpowertrain.com/i-8521...c-bearing.html