Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

Need some help

Thread Tools
 
Search this Thread
 
Old 06-24-2012, 09:33 PM
  #1  
Teching In
Thread Starter
 
mmarty71's Avatar
 
Join Date: Nov 2011
Location: North Platte,NE
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Need some help

Hey all, been awhile. I want to get going on my lq4 stand alone harness project but I ran into a problem. The harness is intact except all the trans stuff has had the plugs cut off. Where can I get the connectors? So far here's what I have. off the red pcm numbers 20,21,62,51,47,8,6,2,58. off the blue pcm 32,34,72,17,18. and off the black c2 from fuse block 2 green,purple/white,yellow,2 pink. All these wires have been cut at the trans (or near it).
Old 06-25-2012, 06:35 AM
  #2  
LS1Tech Sponsor
iTrader: (5)
 
psiconversion's Avatar
 
Join Date: Feb 2007
Location: Brick, NJ
Posts: 1,310
Likes: 0
Received 11 Likes on 9 Posts

Default

What year is the swap? We have pigtails for the transmission if you need them. Give us a call at 732-691-6531.

Jon
PSI
__________________

Your Source for LSX Conversion Parts!
www.psiconversion.com

Ebay Store
Facebook/psiconversion
Instagram/psiconversion

'Dont Let EFI Pass You By!'
Old 06-25-2012, 09:52 AM
  #3  
Teching In
Thread Starter
 
mmarty71's Avatar
 
Join Date: Nov 2011
Location: North Platte,NE
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

The engine is a 2001 and I am using a 4l60e trans. I want to get the wiring set up so I can use the engine in whatever I want.
Old 06-25-2012, 12:24 PM
  #4  
LS1Tech Sponsor
iTrader: (5)
 
psiconversion's Avatar
 
Join Date: Feb 2007
Location: Brick, NJ
Posts: 1,310
Likes: 0
Received 11 Likes on 9 Posts

Default

Ok. We have the pigtails (TRANSMISSION and VSS) if you need them.

Jon
PSI
__________________

Your Source for LSX Conversion Parts!
www.psiconversion.com

Ebay Store
Facebook/psiconversion
Instagram/psiconversion

'Dont Let EFI Pass You By!'
Old 06-28-2012, 12:48 PM
  #5  
Teching In
Thread Starter
 
mmarty71's Avatar
 
Join Date: Nov 2011
Location: North Platte,NE
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

How much would the fittings be?



Quick Reply: Need some help



All times are GMT -5. The time now is 11:18 PM.