bigarmzz

iTrader: (2)

where's everyone getting there complete take out LS motor's/auto trans now adays? the junk yards around here are on crack for what they want...

i've read where some have got a complete 5.3L/auto trans complete with harness and accessories for like 1k or less...i'd love to know where???

i'm located in elkins wv zip is 26241

can anyone point me in the right direction? thanks

Che70velle

iTrader: (6)

Where are you located?

Regal454

www.car-parts.com

superdave84

Bow Auto in NH. I got mine shipped here to MD LITERALLY 26 hours after I paid for it. Prices start at $750 for a complete 5.3, up to like $1600 for a low miles 6.0. They also have 4.8s and they may have some 6.2s too. They are super friendly and helpful....really great people.

Shipping only cost me $100, but I had to have it delivered to a commercial address.

You can try your luck in salvage yards or craigslist, but I looked for months and found nothing there.

FAST LS1

iTrader: (2)

I found an 04' 5.3 complete(computer, harness, accessories, etc) for $500 out the door, and a 4L80E for $700 out the door. It was at a very well organized, larger junk yard, and I did have to drive over two hours to find a deal like that.

BOXCHEV

iTrader: (3)

https://ls1tech.com/forums/conversio...ine-trans.html

Few people posted places they have purchased from.

LsxNotchy

i got my 6.0 from a local junk yard.. 60,xxx miles i heard it run and even drove it.. got the complete engine and complete harness with the pedal for $750

468BIGBLOCK

iTrader: (4)

you can shop around and find some high mileage stuff for that price range. i just bought a 30k mile 5.3 engine and trans package for $3250.00 I love it i would not take $4000.00 for it!! my buddy just bought a complete package for $1300.00 it had 229k miles on it. he found his on www.car-part.com good luck with the hunt.

alcwkat

I found a couple GTOs nearby on car-parts.com, but ended up getting an 02 Camaro LS1/4L60e w/ 58k on Ebay for $3400. Was $500 to ship from CA but well worth it.

twinturbo2

iTrader: (16)

where ever u buy a pullout be careful i got a couple lately that where suppose to be good and comp test done and one had broke rods and this last one had a inch of mud in 2 clys

HOTROD7575

I know what you are saying right there. i spun a rod bearing in my t/a and i tried to be a tight wad and be a cheap *** and i bought a burned one. it turned out to have water on top of the piston from the fire department putting it out. so it returned it and got my money back on that one. i paid $900.00 for this one. then i went a bought a good runner for $1500.00

superbean

I have also bought from them, $750 for a 108kmi 5.3 complete, but I also live in NC so shipping was a tad higher. 6 mo warranty