10 Pennies
#1
10 Pennies
This has been an ongoing project for myself for the last few years. It started out as a simple bodydrop project and spiraled into something far from simple. Its definately a full build and is far from done, but just figured I'd share. I'll let the pics do the rest.
Out with the floors, firewall, rocker panels
Out with the old frame
New frame started, 3x3x1/4"
New rear clip, 2.5" DOM tube
Floors started
Radiused door sills
Rear suspension setup, 4 link, cantilever bag setup, watts link, 8.8 rear narrowed 14"
Front suspension setup, tube arms, rack and pinion, engine mounted
2003 Vette LS1 with a Camaro trans
Frame off the table
Back on the ground
New shiney things, Raceline speedsters 20x8.5, 20x12
Upgrade to C6 Z06 brakes
Out with the floors, firewall, rocker panels
Out with the old frame
New frame started, 3x3x1/4"
New rear clip, 2.5" DOM tube
Floors started
Radiused door sills
Rear suspension setup, 4 link, cantilever bag setup, watts link, 8.8 rear narrowed 14"
Front suspension setup, tube arms, rack and pinion, engine mounted
2003 Vette LS1 with a Camaro trans
Frame off the table
Back on the ground
New shiney things, Raceline speedsters 20x8.5, 20x12
Upgrade to C6 Z06 brakes
#2
Headers, 1.75" tube into 2.5" collector, x-pipe, 2 magnaflow mufflers,v-bands
Started to strip the paint
Aluminum fuel cell, designed for intank pump using factory sender
Headed for its first show, shot for under construction for mini truckin
Its a little further along now, but this will do for awhile.
Started to strip the paint
Aluminum fuel cell, designed for intank pump using factory sender
Headed for its first show, shot for under construction for mini truckin
Its a little further along now, but this will do for awhile.
#5
Why not right hand drive? I'm in Maryland, but want to see the looks on peoples face when its out driving around. Everything to do with the steering, exhaust, firewall, was all new so it was just a matter of which side to put it on.
Trending Topics
#11
LS1Tech Sponsor
iTrader: (5)
Nice Skills.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#14
Thanks guys. I've built a lot of it myself, but did have help from a few friends with a little more knowledge with the frame and floors. John @ Getbored Designs has helped tremendously and I will give him credit for the frame and suspension design.
Engine will be freshened up with a new cam and just a few bolt ons. I'd love to put a Maggie on, but I want to keep a stock hood with the body drop which is hard to do, especially when you cut into the rockers.
Engine will be freshened up with a new cam and just a few bolt ons. I'd love to put a Maggie on, but I want to keep a stock hood with the body drop which is hard to do, especially when you cut into the rockers.
#16
On The Tree
Join Date: Oct 2012
Location: Kennesaw, GA
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
wow! This type of thing really isn't my cup of tea, but you have done some awesome work! I can definitely appreciate all the fab work that has gone into this! Cant wait to see more progress!