copley87blaze

Here we go. Old set up was a stock 5.3 with a pt 74 turbo. Made 554hp and 560ftlbs @ the wheels. They could not load the dyno up, so this was only at 12psi. Mostly ran 15psi on the street, very fun to drive.


New Build sheet

STd bore 5.3 block NOS GM
STD crank
Wiseco pistons Std bore 3.780
K1 Rods 6.125 with arp 7/16 bolts
Stock 317 heads with prc 650 springs
Cam ????? Tnks Bmf
Pt 47/88 turbo 96ar
Stock pcm
80lb inj
AMS 500 with co2
Water Meth
Water too air ic Thnks BMF
JGS 60mm wg
JGS60mm bov
2.5 or 2.25 cross over
Bradco converter Thnks BMF
th400 built bye me
8.8 ford 3.08 gear

All in a s10 blazer. Shooting for 800/1,000 whp we shall see pics soon.

copley87blaze

Std bore 5.3 NOS GM

copley87blaze

copley87blaze

copley87blaze

copley87blaze

copley87blaze

BMF_Racing

iTrader: (6)

Looks like a good start, turbo is not going to fit, it's bigger than the engine bay.

no green

in for updates. Building a ls turbo blazer myself.

BMF_Racing

iTrader: (6)

his rotating assembly is out getting balanced with mine right now. Hoping to get his back early next week. There should be more updates shortly there after.

copley87blaze

Update More pics of my build.

copley87blaze

copley87blaze

91blowthru

What's the plan for headers / manifolds? Any pics of the truck?

copley87blaze

Stock truck manifolds, will post some pics of truck shortly.

copley87blaze

First pick from street cars shootout. Just recently installed cage. Oh one more!!!! Will have to load it up.

91blowthru

Do you have a build thread? Pics of the hot side. ? I had a lq4 Sonoma but was a log manifold..

copley87blaze

No didn't think too start a thread, I am with this build though. Short vid of motor running. oh yeah the after math a22413c.jpg[/IMG]

copley87blaze

click on the motor.

copley87blaze