corvette filter fitting leak
06-23-2014, 08:26 PM
#22
Staging Lane
Join Date: Jul 2011
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
I have the opposite issue Mine seals up great when pressurized, but if you push the outlet in, it sprays fuel everywhere. So, with steel braided PTFE hose attached, if that hose moves just a little inward, it sprays fuel. WTH? I have the kit from Speedway Motors.
06-24-2014, 03:56 PM
#23
Staging Lane
Join Date: Jul 2011
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
06-08-2017, 06:07 AM
#24
Teching In
Join Date: Apr 2014
Location: Norway
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for picking up an old thread. I bought my filter/regulator kit with Russell AN6 fittings on eBay, and i have the same concern..
The output side adapter can be pushed in and out a bit after i plugged it in. I may just fire up the fuel pump to see if it's leaking, once i have connected the fuel line to the fuel rail on the car. Hopefully i'm lucky, but it seems odd..
The output side adapter can be pushed in and out a bit after i plugged it in. I may just fire up the fuel pump to see if it's leaking, once i have connected the fuel line to the fuel rail on the car. Hopefully i'm lucky, but it seems odd..
06-08-2017, 01:46 PM
#25
06-29-2017, 03:31 AM
#26
Teching In
Join Date: Apr 2014
Location: Norway
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
It's not the end of the world anyway, i will probably check all the hoses anyway when i fire up the pump the first time. 