Clutch Fork PROBLEM NEED HELP
#1
Teching In
Thread Starter
Join Date: Mar 2013
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Clutch Fork PROBLEM NEED HELP
Got a 79 malibu that had v6 swapping to a 5.3 with valve spring cam job
Bought the 621 bbc bell housing , nfw1050 flywheel , performance clutch kit
MY PROBLEM
The throwout bearing arm or clutch fork from the v6 wont line up in the 621 bbc bell housing
So which clutch fork arm i need CAN SOMEONE HELP ME PLEASE
Bought the 621 bbc bell housing , nfw1050 flywheel , performance clutch kit
MY PROBLEM
The throwout bearing arm or clutch fork from the v6 wont line up in the 621 bbc bell housing
So which clutch fork arm i need CAN SOMEONE HELP ME PLEASE
#4
Teching In
Thread Starter
Join Date: Mar 2013
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
its not lining up in the center of the pressure plate nor will it sit on the ball
tryin to see if theres a different fork arm cuss the one i have comes off a v6
tryin to see if theres a different fork arm cuss the one i have comes off a v6
#7
TECH Fanatic
iTrader: (7)
That picture I "borrowed" from Pace Performance I think...if I remember correctly they wanted like over $40 bucks...
I think Summit/Jegs has them for under $20...
Google that part # I gave you, there will be lots of places that handle it.
If you search a little, I'll bet there are vendors on this site that will have what you need.
It's nice to support them.
Trending Topics
#10
Teching In
Thread Starter
Join Date: Mar 2013
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Gary68 and CattleAc for helping me out ordered the clutch fork from the parts place today BUT they dont have that throwout bearing with the 1.25 diameter and part store here in my area dont have it either
Do yall have a part # for the throwout bearing?
Do yall have a part # for the throwout bearing?
#12
Teching In
Thread Starter
Join Date: Mar 2013
Location: Mississippi
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
**** i asked them to pull up one that compatible to the 1050 flywheel 84.99 what they told me
that was o reillys
then one had like a 1.248 but will double check tomorrow
that was o reillys
then one had like a 1.248 but will double check tomorrow
#13
TECH Junkie
iTrader: (1)
That sachs flywheel is used in 1999+ trucks. They use a hydraulic throwout bearing. You need one that works with the 621 bell, fork, and z bar.
I just looked up a 70 chevelle, 454 release bearing on Rock Auto, $13.
Read this carefully:
http://www.novak-adapt.com/knowledge/clutches_etc.htm
I just looked up a 70 chevelle, 454 release bearing on Rock Auto, $13.
Read this carefully:
http://www.novak-adapt.com/knowledge/clutches_etc.htm