Bmw e30 m3 ls1/6spd
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2012
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Bmw e30 m3 ls1/6spd TURBO
1988 E30 M3
1999 LS1 w/ LS6 Manifold and Shortys
Stock T56w/ Monster Stage 2 Clutch
4.10's LSD
So here is a short walk around video...
And my build thread...
http://www.r3vlimited.com/board/showthread.php?t=250378
I have no idea how fast it is but it did easily walk away from a brand new 5.0. So about 12's
Plans are pretty simple. Heads and Cam for 400hp. The car weights about 2700lbs so I think 400hp is more than enough.
1999 LS1 w/ LS6 Manifold and Shortys
Stock T56w/ Monster Stage 2 Clutch
4.10's LSD
So here is a short walk around video...
And my build thread...
http://www.r3vlimited.com/board/showthread.php?t=250378
I have no idea how fast it is but it did easily walk away from a brand new 5.0. So about 12's
Plans are pretty simple. Heads and Cam for 400hp. The car weights about 2700lbs so I think 400hp is more than enough.
Last edited by LSM3; 06-05-2014 at 12:01 AM.
#3
My swap is 2800lbs w/ a stock '04 GTO engine, so ~350hp. It's plenty fast. But have the same plans, a cam and heads and hopes for ~400hp.
I've also been looking at supercharging
I've also been looking at supercharging
Last edited by rotor vs. piston; 05-06-2013 at 05:25 PM.
#6
I have a procharged ls1 with built heads and a huge .624 cam. Once I figure this wiring out it will be ready form the road
What I would do for a e30 M3...
What I would do for a e30 M3...
Last edited by blusylver; 05-07-2013 at 03:16 PM.